Steel Market Update was founded because I felt the quality of information (as well as the sourcing of information) was not up to the standards I felt necessary when I was selling steel. I can remember contacting one of the periodicals and asking them why they were referencing prices in a certain way when the […]
November apparent steel supply grew by 8 percent year-over-year to 8,468,720 tons. Imports were up by 28 percent (semi-finished being a major piece up 41.57 percent) while exports shrunk by almost 19 percent to just under 1,000,000 tons (998,040 tons). The United States increased its imbalance as a net importer (YOY) has grown apparent steel […]
This week, the SMU Fair Value HRC (hot rolled coil) Model has spot HRC pricing below Fair Value for the first time in nine weeks. This is due to the SMU average spot HRC index decreasing $5 per ton to $620 per ton and scrap inputs remaining the same over last week’s figures. The Fair […]
Based on the weighted results from our most recent steel survey which was conducted this past week, SMU found lead times slipping slightly on all flat rolled products followed by our company. Benchmark hot rolled average lead times declined to 3.38 weeks and are much shorter than the 4.76 weeks measured by the SMU survey […]
Benchmark hot rolled coil (HRC) declined across each of the indexes watched by Steel Market Update, as did each of the other flat rolled products. Steel Orbis took their numbers down the most after sitting at $620 on HRC and $720 on CRC for 9 weeks. SteelBenchmarker, which produces their numbers twice per month, and […]
On Tuesday, January 15th, Steel Market Update (SMU) began our second steel survey of the New Year. Our surveys are focused on the flat rolled steel market and are conducted by inviting slightly less than 700 companies who are asked to participate by invitation. Of those participating in last week’s survey 48 percent of the […]
Three mills are out this week attempting to dump steel quickly in the marketplace at $560-$580 per ton. The lead mill is known to do this just prior to announcing a price increase. SMU is being told the mills are asking for large block tons of hot rolled in order to book at these levels. […]
Written by: Sophia Fain A. M. Castle & Co. announced restructuring plans to improve annual operating profit by $33 million once fully implemented in 2013. Changes to its metals business include an organizational restructuring, warehouse realignments and performance improvement programs. “This broad, performance-enhancing plan will enable us to better serve our customers by organizing our […]
Canadian steel service centers shipped a total of 338,600 tons (all products) during the month of December 2012 – this represents a decline of 19.3 percent compared to last year (not adjusted, 16 percent seasonally adjusted) when the Canadian distributors shipped 419,500 tons. At the end of December, Canadian distributors ended the month with 1,832,800 […]
Exports at lowest levels since February 2011
Written by: Andre Marshall, Crunchrisk LLC Financial Markets On the equities markets we hit a new 5 year high reaching 1485 on SP 500 today. In this current rally you might recall our target point for this move is 1488 and so we may be near a point for a little retracement. If this current move […]
U.S. distributors grew annual shipments by 1.81 percent (all products) according to Metal Service Center Institute data during calendar year 2012. Shipments totaled 41,447,900 tons. Flat rolled shipments also rose during 2012 totaling 26,378,900 tons which represents an improvement of 2.39 percent over the previous year. Plate shipments were up by 2 percent, while pipe […]
The Metal Service Center Institute (MSCI) released service center shipment and inventory data for the month of December on Wednesday of this week. For total steel products, shipments were down slightly to 136,900 tons per day compared to 140,800 tons per day last year. On a seasonally adjusted basis shipments were 4.6 percent lower than […]
SMU Steel Buyers Sentiment Index improved to +27 this week, this is 6 points better than the +21 measured during the first week of January and is almost back to the levels achieved during the middle of December (+28). However, current Sentiment is well below the +49 measured during the middle of January 2012 – […]
Our steel market survey continues with invitations out to approximately 689 companies. We will send a reminder to those who have not yet responded at approximately 8 AM ET on Wednesday morning. SMU will continue to collect responses until 3 PM ET on Thursday and will begin reporting our findings in Thursday evening’s issue of […]
Steel Market Update (SMU) has developed an exceptional basic steel training program covering the steel industry (flat and long products). Our two day workshop, which we call – Steel 101: Introduction to Steelmaking & Market Fundamentals – is meant to provide a comprehensive review of the way steel is made by the blast/BOF or electric […]
The American Iron & Steel Institute (AISI) reported their estimated raw steel production data for the week ending January 12, 2013. According to AISI estimates the U.S. steel industry produced 1,819,000 net tons of raw steel last week. This represents an increase of 3.6 percent compared to the week earlier but is 5.2 percent lower […]
For the past seven weeks, Steel Market Update (SMU) Price Momentum Indicator has been stuck in “Neutral” waiting for something to push prices in one direction or another. When we made the adjustment the week of November 27, 2012 from Higher to Neutral our SMU range for hot rolled coil was $620-$660 per ton (average […]
Flat rolled steel prices continued to drift slightly lower as buyers reported a tighter range than what we had seen one week ago. The top end of the range for all of the items declined between $10 and $20 per ton this past week. The net result being our averages adjusted lower by $5 to […]
I want to extend our apologies for the “test” newsletter which was sent out to our members by our website developers on Saturday. We received a few emails surprised at some of the dated headlines. Seems like a few people don’t believe “stability” is in the cards for the current market. I received a number […]
According to Baker Hughes data from January 11th, 2013, the U.S rig count for this week is 1,761 rigs exploring for or developing oil or natural gas. This number represents a decrease of 1 rig from last week. Compared to last year the 1,761 count is a decrease of 226 rigs. Canadian rigs increased by […]
Residential Storage Water Heaters U.S. shipments of residential gas storage water heaters for November 2012 increased 23.9 percent, to 412,416 units, up from 332,886 units shipped in November 2011. Residential electric storage water heater shipments increased 6.9 percent in November 2012, to 331,237 units, up from 309,985 units shipped in November 2011. For the year-to-date, […]
This week, the SMU Fair Value HRC (hot rolled coil) Model has spot HRC pricing above Fair Value for the ninth week in a row. This is due to the SMU average spot HRC index decreasing $10 per ton to $625 per ton and scrap inputs remaining the same over last week’s figures. The Fair […]
At the moment we have broken into two camps when it comes to hot rolled coil – the CRU and SteelBenchmarker (which did not report prices this past week) who both pegged their HRC prices in the mid-$630’s – and the rest of the indexes we follow on a regular basis and ourselves (SMU) who […]
On Friday, the U.S. Department of Commerce released final census data for the month of November and preliminary census data for the month of December. Based on that data, SMU forecast 2012 imports will be 17 percent higher than what was imported one year earlier. A large portion of those tons were imported by domestic […]
I spent part of an afternoon with one of our customers the other day. When I was selling steel this was a common occurrence. Now my schedule and time constraints make it much more difficult and that is one of the things I miss from my steel sales days. One of the questions this individual […]
Based on the raw steel capability adjustment which was made by the American Iron and Steel Institute (AISI) as of the beginning of this year, SMU is adjusting the way we will present our visual data to our readers. We will begin to compare weekly production against the “revised” weekly production number from the comparable […]
SMU has been asked about the status of the negotiations regarding the sale of the ThyssenKrupp Steel Americas assets. This includes ThyssenKrupp Steel USA and their sister facility in Brazil which produces slabs – CSA. We understand the due diligence process continues and a number of mills have been through both facilities. Based on SMU […]
Steel Market Update received a surprise the other day when Construction Management Degree (www.ConstructionManagementDegree.com), a website dedicated as an online resource for students looking to expand their education within the management segment of the construction industry, recognized SMU as one of the top 100 construction-related websites online. The list was compiled as a service to […]