Steel Market Update (SMU) conducted our mid-February flat rolled steel market survey this past week. Our surveys are by invitation only and our current invitee list consist of 586 companies. The vast majority of the individuals or companies associated with our survey have been vetted by SMU management to insure that we are working from […]
Steel prices continue to drop on most, if not all, of the indexes followed by Steel Market Update. Benchmark hot rolled coil was referenced at $645 per ton by both Steel Market Update and Platts. CRU had HRC pegged a few dollars higher at $649 per ton. SteelBenchmarker, which is part of World Steel Dynamics, […]
Domestic mill lead times hardly budged according to our most recent SMU steel market survey of the flat rolled steel market. Those participating in our survey put the average hot rolled lead time at 3.70 weeks. This is down slightly from the 3.89 weeks measured at the beginning of the month. The three month moving […]
All flat rolled steel prices, with the exception of cold rolled (and plate which we do not currently measure), were reported as being more negotiable at the domestic mills this past week. This result is based on the Steel Market Update proprietary flat rolled steel market survey which was concluded last Thursday (February 20th). Eighty-eight […]
Steel 101: Introduction to Steelmaking & Market Fundamentals. Our next workshop will be held in Dearborn, Michigan on May 6-7, 2014. The workshop will include a tour of the Severstal Dearborn fully integrated steel mill. We think the program, our instructors and the mill tour are excellent. But don’t take my word for it. Here […]
Iron ore inventories in China are bloated with 100.91 million metric tons of ore now sitting at the 40 major ports in China. This number has grown since the 86 million metric tons reported prior to the beginning of the Chinese New Year in January. This growth continues despite a slowdown in the Chinese steel […]
Based on the most recent MSCI flat rolled steel data Steel Market Update has calculated that U.S. service centers grew their “Excess” inventories from +2,000 tons at the end of December to +150,000 ton at the end of January. The “Apparent Excess” is based on a proprietary model which projects future shipments and inventory levels […]
Tonight’s issue is a mouth full. There are times when events occur which need more than 300 words to address. And, in the steel industry, there can be many viewpoints on the same subject. OCTG is one of those subjects. I hope you found the three articles from David Phelps, Paul Lowrey and Peter Brebach. […]
The domestic steel mills and oil country tubular goods (OCTG) manufacturing companies which filed dumping cases against India, the Philippines, Saudia Arabia, Taiwan, Thailand, Turkey, Ukraine and Vietnam are happy. However, the big fish – Korea – escaped with no duties being instituted. The U.S. Department of Commerce released affirmative preliminary determinations […]
Steel Market Update (SMU) participates in a monthly galvanized steel conference call with the HARDI wholesalers, manufacturing companies and service centers associated with the HVAC related organization. The wholesalers in the Upper Midwest, East Coast and as far west as Wichita, Kansas reported having lost 5-6 days of shipments due to inclement weather in their […]
The Metal Service Center Institute (MSCI) reported today that January 2014 carbon steel shipments were essentially flat (same) as one year ago. However, flat rolled shipments improved compared to one year ago. You can view the MSCI press release on shipments and inventories on their website. Service centers shipped 3,648,200 tons of steel products during […]
As we mentioned last week, Steel Market Update will provide our members weekly steel import forecasts based on license data provided by the U.S. Department of Commerce (beginning with the second week of the month). We advise our members to spend a few minutes and read David Phelps article about the import license data and […]
Galvanized steel buyers need to be aware that zinc prices have been rising since the beginning of February. The metal is close to its one year high but still has a ways to go before reaching the level at which the domestic mills last raised coating extras on galvanized steels. Zinc has been trading around […]
It was a crazy day as all of the government data was not released until 5 PM ET or later – and there was a lot of it. Perhaps the most interesting is the US Department of Commerce “preliminary dumping margins” on oil country tubular goods. Maybe I should restate that – the most interesting […]
Steel Market Update (SMU) received an email from one of our readers regarding his concerns as the iron ore spot prices drop in China and ore inventories rise. The writers belief is that United States flat rolled steel prices will be impacted eventually. This service center executive wondered what our Asian iron ore and steel […]
The move by the domestic mills to reach $700+ per ton hot rolled is nothing but a blur in the rear view mirror according to the various steel indexes followed by Steel Market Update. Flat rolled steel prices fell across the board on hot rolled, cold rolled, galvanized and Galvalume steels this past week. The […]
There are always two sides of a coin. When looking at AK Steel, buyers are seeing a mill aggressively offering hot rolled at the lower end of the SMU HR pricing range while, at the same time, fully annealed cold rolled and galvanized are on an inquire only basis. Steel Market Update has received mixed […]
Steel Market Update will conduct our mid-February flat rolled steel market analysis beginning on Monday morning at 8 AM ET. We encourage those who receive an invitation to participate in our survey to click on the link and spend five minutes answering our inquiries about market conditions, demand, inventories, foreign steel and steel pricing. All […]
During the month of January, Steel Market Update provided steel import forecasts for the month of January based on the weekly license data provided by the U.S. Department of Commerce. As we have explained previously, license data can be quite misleading compared to the final Census numbers. However, we did receive a number of emails […]
One of the questions Steel Market Update is asked, is can we compare domestic hot rolled pricing vs. world export price? The spread, which we have seen referenced as high as $150 per ton in other publications, can be somewhat deceiving if not evaluated properly. The world export prices on hot rolled coil (HRC) as […]
We will hopefully have information and a date for a new workshop we have under development. The new workshop is tentatively being called: Managing Price Risk: Strategies & Execution. The workshop will be for those who already have some knowledge of hot rolled coil (HRC) and busheling (BUS) futures and options trading. Our intention is […]
On Monday, Steel Market Update revised our SMU Price Momentum Indicator from Neutral to Lower. The adjustment means we anticipate flat rolled steel prices will move lower over the next 30 to 60 days. At the time of the change, SMU benchmark hot rolled coil was published at $660 per ton. The last adjustment to […]
Scrap prices for February deliveries to the domestic mills have settled in most areas of the country. In Chicago and the Upper Midwest we are seeing prices down from the previous month as #1 HMS (heavy melt scrap) is at $390 per gross ton, shredded scrap ranges from $400-$410 per gross ton (average $405) and […]
For those of you watching the weather you may be aware that Atlanta is suffering through another winter weather event. Since our offices are located north of Atlanta that means we are suffering as well. The good news for me personally is I decided to spend a few days in Florida after attending the Port […]
Manufacturing companies and service centers are beginning to agree on one topic: service center spot prices are faltering and spot price offers are beginning to drop. The percentage of manufacturing companies reporting lower spot prices out of the service centers rose from 4 percent in early January to 20 percent. At the same point in […]
Based strictly on our most recent flat rolled steel survey results, Steel Market Update is seeing modest improvements being reported in demand. As a group, our survey respondents have been becoming more optimistic as those reporting demand as in decline has shrunk from 17 percent in early December to 7 percent this past week. At […]
Steel analyst Charles Bradford of Bradford Research spoke at the Port of Tampa Steel Conference this past week. He presented a relatively upbeat analysis of the domestic steel industry. He began by referring to a recent McKinsey and Company report which basically said, “The steel industry has had it, it’s over. The industry doesn’t make […]
The various indexes we follow on a regular basis all had prices on benchmark hot rolled moving lower this past week. Platts took the biggest leap moving from $675 to $660 in one week. SMU dropped $5 per ton to $660. Plate prices rose at Platts but dropped with CRU. The result is we are […]
One of the interesting tidbits that came out of the ArcelorMittal conference call last week was their intention of taking down the #7 blast furnace at Indiana Harbor for two months beginning in May. They also discussed the purchase of ThyssenKrupp which they feel will be completed by the end of March (end of 1st […]
Steel Market Update (SMU) began collecting responses earlier this week from the just shy 600 companies invited to participate in our twice monthly flat rolled steel market analysis. The individuals responding to our questions this week – particularly those related to our SMU Steel Buyers Sentiment Index – were being influenced by weather related issues […]