Buyers and sellers of steel continue to grow in their belief that their company will be successful in both the existing market as well as out into the future. A new record high for our Index was achieved this week as our Steel Market Update (SMU) Steel Buyers Sentiment Index was measured at +59. This […]
Steel Market Update conducted our early May flat rolled steel market survey this week and the results are raising some questions as to whether the tightness in supply is beginning to abate. We found hot rolled lead times as shrinking half a week and cold rolled a little more than what we had reported from […]
The domestic steel mills continue to be united in their approach to negotiating flat rolled steel pricing. Based on data collected this week from our flat rolled steel market survey, we found that only 30 percent of the respondents were reporting the domestic mills as willing to negotiate hot rolled steel pricing. This is up […]
On Tuesday of this week, Steel Market Update publisher, John Packard met with Saikat Dey, CEO of Severstal North America (NA), and discussed a wide range of topics including foreign steel, supply and demand issues, steel prices, the F-150 move to aluminum and much more. In the article below we will focus on Mr. Dey’s […]
You can expect to begin to read a lot of articles calling for prices “peaking” or about the subject of where do prices go from here. The expectation is that prices will move lower and everyone will have an opinion or theory as to why this will happen. Others will make the case for sideways […]
When Nucor announced their earnings on April 24th they held a conference call with analysts to discuss their business and to make statements about their company, the markets they serve and about the economy in general. John Ferriola, Nucor’s Chairman, CEO and President, provided an opening statement during which he made the following remarks regarding […]
Our Steel 101 workshop spent the afternoon touring Severstal Dearborn. As the class climbed catwalks and peaked at molten steel I spent most of the afternoon in the executive offices meeting with the mill’s CEO Saikat Dey.This was my first opportunity to meet with Mr. Dey and I found him to be intelligent, charming and […]
This past week three of the four flat rolled steel price indexes followed by Steel Market Update (SMU) reported only modest gains in benchmark hot rolled pricing with SMU being the most conservative holding our pricing at the same levels as we had reported the prior week. Platts was the one exception as their hot […]
April turned out to be a month where supply disruptions squeezed the life out of non-repentant steel buyers: flat rolled steel buyers who had run their inventories too lean or who hesitated when U.S. Steel Great Lakes went down, only to be ambushed by steelmaking curtailments at USS Gary Works (and elsewhere) due to iron […]
Steel Market Update (SMU) flat rolled steel price indices all saw very large double digit increases from the beginning to the conclusion of April 2014. Steel Market Update provides a range for our readers from low to high with the average being our indexed number for the product. We saw benchmark hot rolled prices increasing […]
Steel Market Update follows a number of price indices on a weekly basis. All of the indices saw double digit increases during the month of April. The average change on hot rolled was +$43 per ton, cold rolled +$47 per ton, galvanized +$66 per ton and Galvalume +65 per ton. Plate prices remained relatively stable […]
Shredded ferrous scrap prices are now projected to be down $15 to $20 per gross ton in the Chicago market according to SMU sources. At the same time prime grades (like #1 busheling) are expected to tread sideways (remain the same as prior month). If, once the deals are completed, all runs true to the […]
The following chart is based on price variances from the end of March until the most recent numbers produced at the end of April. All commodities saw price increases with the exception of iron ore which was down quite dramatically (China spot market).
Based on revised domestic and world export pricing on hot rolled coil (SteelBenchmarker), the price spread between the two continues to grow. As you can see by the graphic shown below, the spread has been widening ever since domestic steel production issues began impacting flat rolled steel pricing in the U.S. and Canada. The spread […]
Steel Market Update was forwarded the following article by one of our contacts in Asia. The article quotes the China Iron & Steel Association (CISA) which reported high levels of debt within the Chinese steel industry. The Chinese appear destined to repeat what happened to the U.S. steel industry during the early 2000’s when many […]
Iron ore prices continue to boil and bubble, with the key word being bubble. At the beginning of April, 62% Fe fines were trading at $117 per dry metric ton (dmt). They peaked nine days later at $119.4/dmt and since then the air has been leaking out of the bubble. On Wednesday, iron ore prices […]
We will begin our beginning of May steel market survey early on Monday morning and will keep it open until Thursday afternoon of this week. If you receive an invitation, please take a moment to click on the link which will take you to SurveyMonkey.com which hosts our questionnaire. Those who participate in our survey […]
According to the American Iron and Steel Institute (AISI) domestic raw steel production totaled 8,273,082 net tons (all products). Of the total 60 percent was produced by electric arc furnaces and the balance by blast/BOF furnaces. Carbon steel products totaled 7,681,790 net tons with 4,665,056 tons being produced by EAF’s and the balance, 3,016,734 tons […]
April is now behind us and it proved to be one interesting month. In looking at the key data we follow on a monthly basis for our readers, SMU Price Momentum Indicator ended the month where it began pointing to higher prices over the near term. SMU Steel Buyers Sentiment Index ended the month at […]
Iron ore prices continue to boil and bubble, with the key word being bubble. At the beginning of April, 62% Fe fines were trading at $117 per dry metric ton (dmt). They peaked nine days later at $119.4/dmt and since then the air has been leaking out of the bubble. On Wednesday, iron ore prices […]
Flat rolled steel mills have become less willing to negotiate flat rolled steel spot prices with their customers. During the analysis of the flat rolled steel market conducted by Steel Market Update earlier this week, we found large adjustments in negotiations on hot rolled pricing as well as spot galvanized steel pricing. Cold rolled actually […]
Today is the 3rd of April and negotiations between the steel mills and their scrap suppliers continue in earnest. We heard from one of our sources that Detroit has settled up $10 per gross ton. Our source reported #1 Heavy Melt (HMS) at $365-$370 per gross ton, shredded scrap at $395-$400 per gross ton and […]
Steel Market Update is aware that many buyers and sellers of steel have been keyed in on the variations between various flat rolled steel indexes. In the past, Steel Market Update found the spread between our steel index and those of Platts and CRU to generally be negligible ($1-$10 per ton at any one time). […]
Each week during the month Steel Market Update (SMU) checks the license data from the U.S. Department of Commerce regarding imports of foreign steel. Based on the data compiled each week we then project where we think imports will end up at the end of the month. April license data is suggesting we could see […]
A quick Final Thoughts this evening as I am in Chicago for the Metals Industry Boy Scout Dinner. For those of you who have interesting sales stories from your steel career or otherwise, I am interested in collecting sales related stories/advice, etc. Please send your comments or stories to me at: John@SteelMarketUpdate.com. A reminder that […]
Steel Market Update continuously is in conversation with flat rolled steel buyers from around the country. We have noticed a growing nervousness within the steel community as the buyers grapple with ever higher steel prices and extended lead times. In some cases the lead times on foreign material are not much more than what the […]
Each week during the month Steel Market Update (SMU) checks the license data from the U.S. Department of Commerce regarding imports of foreign steel. Based on the data compiled each week we then project where we think imports will end up at the end of the month. April license data is suggesting we could see […]
According to a note recently received from one of our active trading sources in Asia, iron ore traders are under pressure as port stocks hit 112.63 million metric tons and new orders for steel exports become more difficult due to anti-dumping sentiment against Chinese steel around the world. Our source told SMU late last week, […]
According to the American Iron and Steel Institute (AISI) domestic raw steel production totaled 8,273,082 net tons (all products). Of the total 60 percent was produced by electric arc furnaces and the balance by blast/BOF furnaces. Carbon steel products totaled 7,681,790 net tons with 4,665,056 tons being produced by EAF’s and the balance, 3,016,734 tons […]
According to a note recently received from one of our active trading sources in Asia, iron ore traders are under pressure as port stocks hit 112.63 million metric tons and new orders for steel exports become more difficult due to anti-dumping sentiment against Chinese steel around the world. Our source told SMU late last week, […]