It was an active month when it came to flat rolled steel prices, at least it was active on a week by week basis. However, when looking at the total month price movement compared against where the previous month ended, then the month of May should be considered rather tame. Hot rolled prices ended the […]
Steel Market Update sources confirmed that the two Severstal North America (NA) steel mills are for sale. At 7.0 million tons of steelmaking capacity, Severstal NA is the fourth largest flat rolled steel producing mill in the United States. Rumors of the possible sale of the Dearborn and Columbus facilities had been circulating around the […]
Steel Market Update (SMU) Steel Buyers Sentiment Index is at +54 this week and continues to be well within the optimistic range for the index. Even though the index dropped 8 points from the all-time high recorded during the middle of May, the growing optimistic trend continues as our three month moving average improved to […]
Steel Market Update (SMU) Steel Buyers Sentiment Index is at +54 this week and continues to be well within the optimistic range for the index. Even though the index dropped 8 points from the all-time high recorded during the middle of May, the growing optimistic trend continues as our three month moving average improved to […]
US Steel has another unplanned outage, this time at their Gary Works facility. The furnace went down on Sunday and is expected to be down for anywhere from three to six weeks according to SMU sources. The furnace, referenced as #8 by US Steel, is the smallest of the four operating furnaces at the Gary […]
Late this afternoon an ArcelorMittal USA customer advised us that AM had opened their August order book. They received a note from the mill which included the following comments: Current demand for light flat rolled products has extended our lead times at all of our Northern producing locations. July order acceptance is now closed for […]
According to the results of our latest flat rolled steel market survey just completed earlier today, mill lead times are slowly beginning to move in (get shorter) on almost all products followed by Steel Market Update. Our respondents reported shorter lead times on hot rolled which were at 4.91 weeks on the 15th of May […]
As mentioned in the article on steel mill lead times included in this newsletter, we tend to see steel mills as more willing to negotiate steel prices as order books begin to get leaner and lead times begin to shrink. We are seeing some retrenchment of lead times and, at the same time, our recent […]
We have been working on trying to get a handle on scrap prices and adjustments in the costs the domestic steel mills will have for scrap during the month of June. SMU sources advised us that with the exception of prime grades of scrap most mills cancelled their remaining orders at the end of the […]
I was asked a number of times today – in a couple of different ways – why Steel Market Update has not adjusted our Price Momentum Indicator from Neutral where it has been for about one month to Lower. The reality is we have been watching spot flat rolled pricing quite closely to see at […]
The steel storage facilities located at ports around the United States are brimming with foreign steel. We have been advised that companies like Kinder Morgan and Fleetwood Port Services are at maximum capacity in their Houston facilities and struggling with Savannah, Camden and other port facilities. However, that is not the major problem facing the […]
Something has to give. US Steel announced the closure of two of their OCTG production facilities. The McKeesport facility has a capacity of 315,000 tons of OCTG per year while the Bellville operation capacity is 100,000 tons of OCTG on an annual basis. Total US Steel production capacity of oil country tubular goods is 2.8 […]
For those of you who are paying attention to our website you might have noticed we added a new sub-menu under the Resources tab. The new menu is called “The Truth About Selling Steel” and we have attempted to split out those articles associated with sales from our Steel Buyers Basics series of articles many […]
With the exception of SteelBenchmarker which only supplies steel indices twice per month, all of the other indexes showed flat rolled steel averages as being either the same or down slightly compared to one week ago. Perhaps the most surprising has been Platts which by the end of this past week had taken its benchmark […]
Ferrous scrap negotiations have begun between the U.S. and Canadian steel mills with most mills expecting lower prices. One way we know if the mills believe prices will fall is they will cancel any remaining orders from May that have not yet been completed from their scrap suppliers in the hopes of being able to […]
Steel Market Update has a close contact who is an active iron ore and steel trader in Asia. He sells iron ore to the Chinese steel mills and then he buys steel from the Chinese (and other Asian) steel mills and ships it around the world. Over the past couple of days we got deeply […]
As usual we will spend a few moments taking a look at the month of May in our rear view mirror to see what transpired. SMU Price Momentum Indicator was adjusted during the month from Higher to Neutral as we detected a change in the supply/demand dynamics with the return to full production at US […]
This article is part of a series of articles written by John Packard originally under the heading “Steel Buyers Basics.” Recent articles have focused on the steel sales process, but sales and purchasing are connected. The fact that my experience is associated with the flat rolled steel markets and products does not detract from the […]
We have had a couple of minor bugs but we hope to have registration open for the 2014 SMU Steel Summit Conference by late Monday or Tuesday of this week. The dates for the conference are September 3 & 4 and the location is the Georgia International Convention Center (GICC) which is located right next […]
Ferrous scrap price negotiations are beginning with at least one deal getting done in Detroit within the past few days at down $22 per gross ton. However, as one scrap dealer explained to us earlier today, scrap prices are all over the board. There are steel mills who are bringing furnaces back online and others […]
While trading emails with one of my Asia trading sources regarding export price offers coming out of China I got the following response, “By the time September rolls around, CRC and other coated products may already be under anti-dumping and nothing sellable to the U.S….” It appears some in China are expecting the inevitable. As […]
While trading emails with one of my Asia trading sources regarding export price offers coming out of China I got the following response, “By the time September rolls around, CRC and other coated products may already be under anti-dumping and nothing sellable to the U.S….” It appears some in China are expecting the inevitable. As […]
Earlier this week SteelBenchmarker reported their latest world export price for hot rolled steel at $501 per net ton ($552 per metric ton), unchanged from their price two weeks ago. With an estimated $70 per ton in freight, handling and trader margin added, that puts the world price at approximately $571 per ton CIF USA […]
In late May SteelBenchmarker reported their world export price for hot rolled steel at $501 per net ton ($552 per metric ton), unchanged from their price earlier in the month. With an estimated $70 per ton in freight, handling and trader margin added, that puts the world HRC price at approximately $571 per ton CIF […]
SMU was told this afternoon that AK Steel has finally “caught up” on their hot rolled and cold rolled orders and, as our source put it today, “was out looking for orders.” There was no reference to AK dropping pricing at this time. We were told the mill was still sold out on coated products. […]
The break for the Memorial Day Holiday here in the United States took some of the pressure off both buyers and sellers of steel as both sides regroup and begin to look at July and beyond flat rolled steel pricing. One steel mill executive told us that they were seeing downward pressure on their mill […]
The U.S. Department of Commerce released Preliminary Census Data on steel imports into the United States for the month of April on Friday. As expected steel imports jumped by 20 percent compared to the previous month and by 36 percent year-over-year (days adjusted basis) to 3,726,199 net tons (3.4 million+ metric tons). This is for […]
The numbers are not looking good for the domestic steel mills as the latest license data from the US Department of Commerce shows May steel imports may well exceed the 3.7 million tons just reported for the month of April (Preliminary Census data for April). We remind our readers that the May tonnage shown in […]
What SMU found interesting when looking at flat rolled steel price movement over this past week is Platts, the industry optimist recently, dropped their benchmark hot rolled pricing multiple times as the week progressed. Platts ended the week down $10 per ton to $685 per ton. The $685 is where SMU had its HRC index […]
There are questions about potential manipulations of zinc and zinc trading which may have artificially inflated the metal’s price since 2010. Zinc, which is the metal used to coat galvanized steel as well as Galvalume, Galfan and ZAM, is believed to have been manipulated by The London Metal Exchange, Goldman Sachs, JP Morgan, Glencore Xstrata […]