On Wednesday, December 2nd Steel Market Update will host another in our series of free webinars with CRU Principal Analyst and editor of the CRU Sheet Monitor – Josh Spoores. Packard and Spoores will chat for about 30 minutes on CRU’s steel sheet forecast for 2020-2021. We will discuss demand, production, and steel prices with […]
On Wednesday, Dec. 2, Steel Market Update will host another in our series of free webinars featuring CRU Principal Analyst and Editor of the CRU Sheet Monitor – Josh Spoores. Spoores and SMU President and Publisher John Packard will chat for about 30 minutes on CRU’s steel sheet forecast for 2020-2021. We will discuss demand, […]
It is Tuesday, Dec, 1, 2020, and the U.S. has just returned from Thanksgiving. I hope everyone enjoyed their long weekend and did what was necessary to remain safe as we wait for the COVID-19 vaccines to be distributed around the world. There is a light at the end of this long journey we have […]
“Market’s great if you have supply.” I was speaking with a service center this afternoon who told me on Monday of this week they were selling spot hot rolled out of inventory at $840 per ton. Then Nucor raised their spot HRC number for February to $840 per ton. Today, all items through this service […]
“Market’s great if you have supply.” I was speaking with a service center this afternoon who told me on Monday of this week they were selling spot hot rolled out of inventory at $840 per ton. Then Nucor raised their spot HRC number for February to $840 per ton. Today, all items through this service […]
The thought of a possible steel shortage gained new ground this past week as news of spreading coronavirus infections at ArcelorMittal Burns Harbor, the breakout at the No. 2 caster at Dofasco, the slow return of production at Stelco due to a hack of their computer systems, and the continued strike at the NLMK USA […]
The Tampa Steel Conference will be held virtually on Tuesday, Feb. 2, 2021. This will be the 32nd year for the conference and, even though we cannot be in Tampa in person, SMU along with our partner Port Tampa Bay are putting together a great lineup of speakers. Here are some of the speakers already confirmed: […]
The Tampa Steel Conference will be held virtually on Tuesday, Feb. 2, 2021. This will be the 32nd year for the conference and, even though we cannot be in Tampa in person, SMU along with our partner Port Tampa Bay are putting together a great lineup of speakers. Here are some of the speakers already confirmed: […]
I am hearing the U.S. Steel Gary Works #4 blast furnace will be coming back up by the end of this year. According to AIST, the #4 furnace is rated at 1,390,000 tons of pig iron annually. So, this means we will have more supply added from USS and from Big River Steel as they […]
Timing is everything–I think we will have some interesting discussions at the upcoming Steel 101: Introduction to Steel Making & Market Fundamentals Workshop to be held on Dec. 8-9. The focus of this workshop is for the attendees to learn how steel is made (EAF and Blast/BOF), rolled, qualities produced, how it is used and […]
The Perfect Storm: Long lead times, late deliveries, low service center inventories, strong demand, higher prices, lack of foreign steel imports, mill outages both planned and unplanned, maximum capacity utilization rates at a number of mills, NLMK USA strike, higher ferrous scrap prices that are expected to go much higher in the coming months, restrictions […]
Flat rolled steel buyers are feeling a little skittish. Based on the results of last week’s flat rolled and plate steel market trends analysis conducted by Steel Market Update, the threat of higher prices, late mill deliveries and fear of a possible steel shortage situation are making steel buyers nervous (see article above with survey […]
The SMU Steel Price Momentum Indicators on all flat rolled and plate steel products are currently pointing toward higher prices over the next 30 days. We expect hot rolled, cold rolled, galvanized, Galvalume and steel plate pricing to increase during the coming weeks. The two major reasons for our position are the limitations of supply […]
I am hearing negotiations on 2021 flat rolled contracts are quite contentious. OEM buyers are telling me the domestic mills are so aggressive with their pricing offers that buyers are having to look for alternative suppliers. As one manufacturing buyer put it to me yesterday, “[The steel mills are] effectively asking us to review other […]
My “final thoughts” provide me an opportunity to give my opinions on a wide range of topics. Some are directly steel related and some are not. The question we are all asking ourselves today is what will a Biden administration mean for business? Here are some thoughts I picked up from my reading over the […]
Growing up I was a bit of a history nerd and my original intention was to be a political science major when I entered Hamline University where I went to college. Over time I morphed into a bit of a political nerd, so elections are exciting times for me. They may not be for many […]
Steel Market Update is excited to announce that after a successful Virtual Steel 101: Introduction to Steel Making & Market Fundamentals Workshop in October, we’ll be offering our next one Dec. 8-9. The Steel 101 Workshop is taught by instructors with a combined experience of well over 100 years. The instructors have a wide array of […]
Steel Market Update is excited to announce that after a successful Virtual Steel 101: Introduction to Steel Making & Market Fundamentals Workshop in October, we’ll be offering our next one Dec. 8-9. The Steel 101 Workshop is taught by instructors with a combined experience of well over 100 years. The instructors have a wide array of […]
For those of us who live in the United States, today should be one where we recognize we have expressed our opinions about politics and politicians with our vote. We recognize the strength of our democracy is rooted in the belief that we are all Americans no matter our political ilk. To believe otherwise only […]
When I look at the results of our flat rolled survey, sometimes I have to scratch my head. In the survey we just completed last week, we asked at what point hot rolled prices would peak. Sixty-two percent of our respondents believe prices will peak at $700 or lower. To them I ask, what is […]
Friday, Saturday, Sunday, Monday, Election Day – Tuesday, Nov. 3, 2020. If you have a mail-in ballot, it is now too late to put in the mail. You will need to personally drop the ballot off at a collection box. If you can vote early, I would highly recommend it (I voted last week in […]
Tomorrow (Wednesday, October 28th) we will host one of our free SMU Community Chat Webinars with Dr. David Schultz, Distinguished Professor of Political Science & Legal Studies at Hamline University. Dr. Schultz is an elections expert, and he has some interesting observations from an academic (as opposed to partisan political) perspective regarding this year’s election. […]
Tomorrow (Wednesday, Oct. 28) we will host one of our free SMU Community Chat Webinars with Dr. David Schultz, Distinguished Professor of Political Science & Legal Studies at Hamline University. Dr. Schultz is an elections expert, and he has some interesting observations from an academic (as opposed to partisan political) perspective regarding this year’s election. […]
We had a good conference call with HARDI wholesalers this morning. The dealers who service the mechanical contractors with galvanized sheet and coils continue to be busy. They are surprised at the steepness of the cost curve, and they are beginning to be wary of paying too high a price. One reason they are wary is […]
Nine days to go… I don’t know about you but my cell phone is being lit up with political calls/texts from both parties – including states I don’t live in. November 4th can’t get here fast enough… Steel Dynamics reported that their mills (all products) operated at 85 percent and their sheet mills achieved a […]
COVID-19 cases appear to be surging again, and we asked steel buyers to advise if they were seeing any changes to their business due to the new cases. Most reported no impact from the virus, but there were concerns about what government might do if cases continue to rise. No one wants another shutdown of […]
I made a boo-boo when disclosing the date for Dr. Schultz doing one of our SMU Community Chat Webinars. The webinar will be on OCTOBER 28TH, not this Wednesday as was originally advertised. My apologies to those who were looking forward to listening to Dr. Schultz this week. I have information about the webinar a […]
Welcome to the year that never ends…and the worst part is just beginning. First, the good news. According to the manufacturing and service center executives who made up 82 percent of the respondents to this week’s survey, the steel economy is going to be much improved in 2021 versus what we have seen this year. About […]
Nucor Tubular Products led the pipe and tube manufacturers announcing a $50 per ton price increase this morning on HSS, pipe, mechanical and piling products. EXLTUBE advised they were following the Nucor lead and announced their fourth price increase on HSS and A53B products matching the Nucor $50 per ton. New orders for foreign steel […]
We are now 23 days from the close of the 2020 presidential election. I think all of us, no matter how we use our vote, are hoping for a quick decision and then an orderly move to either the second term of President Trump or the new Biden administration. If you have not already voted, […]