Steel buyers were few and far between this week as everyone prepares for Christmas and Hanukkah holiday celebrations. Even so, those who were working this week and responding to our queries reported aggressive steel mills on all flat rolled products. We have seen erosion at the upper end of our range on all products and […]
The good news for the consumer is gasoline prices are closing in on $2.00 per gallon in many areas of the country. The bad news for the steel industry is the drop in oil prices means a slowdown in new drilling, one of the major users of hot rolled coil. The good news for buyers […]
This will be our last issue before Christmas and the last day of Hanukkah. We wish each and everyone one of you and your family all the best over the Holidays. I drove from Atlanta to Chicago over the weekend as we prepare to celebrate the Holidays with our son. One of the first gifts […]
All of the flat rolled steel indexes which reported pricing this past week saw benchmark hot rolled prices as being down and another step closer to touching $600 per ton. From Steel Market Update’s vantage point, the lower end of our range has broken down to $580 per ton ($29.00/cwt). Our HRC average for the […]
As we approach the end of the year we begin to think about what is ahead of us for 2015. Will we see the massive amounts of foreign steel continue to flood the domestic (USA) market or will buyers back off as domestic prices slide closer to foreign offers? The expectation is for demand to […]
Steel Market Update (SMU) released their Steel Buyers Sentiment Index this afternoon. Sentiment, which is a measure as to how buyers and sellers of flat rolled steel feel about their company’s ability to be successful in the current market environment, rose 4 points from the beginning of December and is now at +56. Positive (+) […]
What may be a disappointment to the domestic (U.S. and Canadian) steel mills is both manufacturing companies and service centers intend to buy more foreign steel during 2015 than they purchased during calendar year 2014. This is most disturbing when you consider that 2014 will go down as one of the biggest years in history […]
Steel Market Update conducted our last flat rolled steel market survey earlier today (Thursday, December 18th). During the survey process we asked some new questions in an effort to see what will be the new trending issues once we move into calendar year 2015. One of the questions posed to those who participated in our […]
Shredded scrap prices are up approximately $20 per ton compared to where they were the first week of December. According to Mike Marley of MetalPrices.com, shred is in tight supply in several Midwest cities due to the decline in the flows of shredded feedstock due to the lower selling prices in October and November and […]
Lead times at the domestic steel mills continue to be shorter than what we saw this time last year (when prices were rising). The average lead time for benchmark hot rolled coil dropped to an average of 3.53 weeks based on the results from this week’s SMU flat rolled steel market survey. As you can […]
U.S. and Canadian steel mills are more willing to negotiate this week than they were during the first week of December, according to the respondents of our latest SMU flat rolled steel market survey. We found 93 percent of the respondents to our survey reporting hot rolled mills as willing to negotiate hot rolled pricing. […]
Last month, Steel Market Update forecast carbon flat rolled shipments out of the U.S. steel service centers would total 2,100,000 tons. Earlier this week the Metal Service Center Institute (MSCI) reported distributors shipped 2,051,600 tons. We over-forecast shipments by 48,400 tons. Our forecast was based on shipments being 4.0 percent higher than November 2013 and […]
A quick reminder to those who have registered (or are about to register) for our Steel 101 workshop outside of Charleston, SC on January 20 & 21, 2015. The special rate ($91/nite) we have negotiated with our hotel (Charleston Harbor Resort & Marina) will expire at the end of the day on Friday (December 20th). […]
We saw prices slipping in hot rolled and cold rolled steels over the past seven days. We are seeing offers on benchmark hot rolled below the $600 per ton level. One service center who is usually a coated only buyer told SMU that they purchased a small amount of hot rolled and they had offers […]
The Metal Service Center Institute (MSCI) reported total steel inventories of 9,195,700 tons. This represents an increase of 15.2 percent above last year and when taking the current shipment rate into consideration, MSCI reported inventories as being 33.1 percent higher than November 2013. The daily shipment rate dropped from 170,100 tons per day (all products) […]
There has been a lot of information floating about the marketplace regarding the Chinese steel rebates and especially those represented as special alloy through the addition of boron to the steel. We wrote about this subject in early November and we remind our readers to go back and review the article entitled: Chinese Boron Added […]
All of the flat rolled steel price indices followed by Steel Market Update moved lower this past week. Based on performance and their ability to keep up with the markets, the three key indices are SMU, CRU and Platts which reported benchmark hot rolled price averages as $615, $614 and $615 per ton, respectively. SteelBenchmarker […]
The subject of how China is going to deal with their surging steel exports continues in earnest after the release of the most recent Chinese export data. As the graphic shows below, the Chinese steel mills have spent this calendar year flooding the world markets with their steel excesses. In November the Chinese steel mills […]
A quick note to advise our readers of our Holiday publishing and office schedule. We will continue to publish as normal through Tuesday, December 23rd. We will not publish our newsletter on Thursday, December 25th and Sunday, December 28th unless there is important breaking news that we feel must be shared with our readers. We […]
US Steel is trying to raise flat rolled steel prices as lead times on hot rolled, cold rolled and galvanized slip into the 1st Quarter 2015. The General Manager of North American Flat-Rolled Marketing at US Steel sent an internal memo to the General Managers of Sales for the mill regarding current market conditions and […]
I was advis ed today that Nucor had reduced their pricing on beams by $40 per ton in order to compete with foreign beam offers. The question then became what are the mills doing to blunt the impact of foreign steel offers of flat rolled products into the United States? As we reported on Tuesday, […]
Flat rolled steel prices continued to erode this week as buyers reported an expansion of discounted offers coupled with short mill lead times. Many steel buyers are telling Steel Market Update that their inventories are relatively high, there are new foreign offers out there at “good” prices and that they can sit back and wait […]
For the past four days Steel Market Update (SMU) has been attending and speaking at the HARDI annual conference in San Antonio, Texas. One of the highlights of the conference were the presentations provided by Alan Beaulieu, one of the principal partners of the Institute for Trend Research (ITR) and the chief economist for HARDI. […]
I always learn new things every time I attend an industry related conference. I find being exposed to industry experts, active steel buyers in one location (with very few to no suppliers around), business owners who feel comfortable in their surroundings, and a few cocktails thrown into the mix, makes for interesting times. I highly […]
Hot rolled prices dropped on all the indexes which reported new pricing this past week. Steel Market Update was down $10 per ton to $620 per ton with CRU ($623) and Platts ($625) coming very close to the SMU number. SteelBenchmarker did not report new pricing this past week as they only report HRC prices […]
Steel Market Update publisher, John Packard, spoke to the Heating, Air-conditioning, Refrigeration Distributors International (HARDI) conference this afternoon. Many of the HARDI wholesalers and associated companies are involved with galvanized sheet and coil steels. As SMU prepared to speak to the group we realized that many times the industry references benchmark hot rolled prices and […]
Part of my talk at the 2014 HARDI conference was regarding galvanized imports which reached 325,000 net tons in October and appear will be approximately 300,000 tons when the November Census Data numbers are released later this month. To put this into perspective, at this point last year the U.S. received 150,000 net tons and […]
SMU Steel Buyers Sentiment Index came in at +52 this week. This is the same reading we got back in the middle of November 2014 The +52, which is within the optimistic range for our index, was 10 points less enthusiastic than what we measured at the beginning of November. One year ago our current […]
Steel Market Update (SMU) conducted our early December flat rolled steel market analysis this week. As part of the survey process, SMU asks those responding questions about flat rolled steel mill lead times. From their responses we create our average lead time for the industry by product. This allows us the ability to evaluate whether […]
Based strictly on the results from our Steel Market Update flat rolled market survey results, domestic steel mills are willing to negotiate prices on hot rolled, cold rolled, galvanized and Galvalume products. This is something that we see on a regular basis as lead times slip and the need for orders increases at the domestic […]