Margins are being compressed at the secondary steel services centers according to SMU secondary market sources. However, unlike prime flat rolled steel where we find prices have been in steady decline for a few months, secondary or non-prime flat rolled steel pricing did not begin to erode until right after the beginning of the New […]
I am looking forward to traveling to South Carolina for our next Steel 101 workshop which is at the beginning of next week. I would like to recognize and thank Nucor and their Berkeley facility for allowing us to tour their flat rolled (sheet) and beam mills. This is the first time I personally will […]
Flat rolled steel prices continued to drop this week as the domestic steel mills struggled with holes in their order books due to growing inventories at the service centers, a sharp drop off in pipe and tube orders associated with the energy markets, and the continued flow of imported steel (which is part of the […]
Flat rolled steel prices have been dropping over the past few weeks and the wholesalers who service the mechanical contractors are concerned as the pace of the price decline quickens. Earlier today Steel Market Update participated in the HARDI sponsored galvanized steel conference call. HARDI (Heating, Air-conditioning, Refrigeration Distributors International) wholesalers supply galvanized sheet and […]
.One of the subjects of conversation I had with a number of buyers is what do the domestic steel mills need to do to break the foreign import cycle? There are some who believe that the steel mills will be best served by letting the prices drift down to the point where the spread between […]
As we reported last week, the $30 per ton ferrous scrap price increases failed to materialize once January negotiations began in earnest. A couple lucky deals were made up $20-$30 just as December ended and January began. However, those deals dried up almost as fast as the ink dried on the paper. We are hearing […]
In each and every flat rolled steel market survey Steel Market Update conducts, we ask both the flat rolled steel service centers and their manufacturing customers to comment on service center spot pricing. SMU believes spot prices being touted by the steel distributors is a microcosm of the health of the greater steel industry. We […]
All the indexes followed by Steel Market Update have breached the $600 per ton ($30.00/cwt) average level on benchmark hot rolled steel prices in North America (one exception being SteelBenchmarker who has not yet reported any pricing for the month of January). The average of SMU, CRU and Platts for this past week was $590.67 […]
Steel Market Update received an email late last week that spoke to the problems the domestic steel mills are facing right now: a weak global steel market, strong dollar, all U.S. production facilities up and running, growing steel inventories, low in-put costs and a collapse in demand from the energy sector. We thought our readers […]
I thought the “Letter to the Editor” which we shared earlier in this issue was quite telling. The New Year is shaping up to be different than the past couple of years. With the drop in input costs and the weak global steel market (and strong U.S. dollar) 2015 could end up being a very […]
The first measurement of our Steel Buyers Sentiment Index in the New Year provided us some mixed results. Current Sentiment, which is how steel buyers and sellers feel about their company’s ability to be successful in the current market environment, was measured at +54. This is well within the optimistic range of our Index but […]
Domestic steel mill lead times continue to slide (shrink) on all flat rolled products with the exception of Galvalume. Based on the results of this weeks flat rolled steel market analysis, hot rolled lead times averaged 3.19 weeks, down one half a week compared to the beginning of December and one week shorter than what […]
The previous article about steel mill lead times being one week shorter than what we saw one year ago set the stage for what we are seeing when it comes to mill negotiations. Our survey respondents almost unanimously reported the domestic mills as willing to negotiate pricing on all flat rolled products. We had 97 […]
Ferrous scrap prices were forecast to be up $30 per gross ton as little as one week ago. According to one of our East Coast dealers there were some early sales at up $20 to $30 to those steel mills who needed to buy immediately. However, those deals were few and far between and the […]
Steel Market Update understands that a number of the steel buyers have recognized zinc spot prices have fallen below $1.00/pound and there are ongoing conversations with the domestic mills to review the extras put into place late last year. In August 2014 the domestic steel mills announced new coating extras due to the run up […]
Steel buyers seem to be unanimous in their opinion of the current steel environment which I heard countless times today termed as “crazy.” Hot rolled buyers are telling SMU that the offers are starting in the $560-$580 range with the caveat “let’s talk” should the buyer actually have some decent tonnage to place. We have […]
Steel Market Update did not rush to break through the $600 barrier for hot rolled coil. We made a conscious decision that due to the Holidays we wanted to wait until this week to make sure we had as many data points as possible before breaking through $600. We are aware that some of our […]
We provided full year projected steel imports in tonight’s issue. Please be aware: 1) the November numbers are Preliminary Census and should be very close to accurate, 2) the December numbers are based on license data and there can be fluctuations in the Census and license data numbers. November is a good example. November license […]
The Chinese central government announced on Wednesday that it would remove the export rebate on certain boron-added steel products effective January 1, 2015. The move was anticipated by our sources in China however the impact of the move may be minimal and short-lived. Steel Market Update received the following information from one of our steel […]
The following is an overview of some of the key steel data collected by Steel Market Update during the month of December 2014. This is separate from our Key Market Indicators which was produced for our Premium level subscribers (although shared with all of our readers on Friday of this past week). Steel Market Update […]
Everyone wants to know how the steel industry did from our perspective over the calendar year 2014. We decided to take a look at the year using quarterly averages as a way of smoothing out the data and giving us a clearer picture of key data and commodity and steel pricing trends. As you can […]
All was quiet this past week as steel buyers dreamed of Sugar Plum Ferries, lower prices and better times for the New Year. Mill sales people attended to their families and toasted higher prices and better times in the New Year. All of this means not much happened last week as SMU and Platts kept […]
Most ferrous scrap pricing deals will be negotiated between the domestic steel mills and their suppliers over the next few days. Steel Market Update sources are telling us scrap prices could move up by $10 to $30 per gross ton or more depending on product and the region of the country. Mike Marley of MetalPrices.com […]
After Steel Market Update (SMU) produced our 11 month analysis of flat rolled steel imports into the United States, we received a number of comments about reality versus the perception behind the numbers. Calendar year 2014 should go down in history as the second largest number of foreign steel tonnage shipped to the U.S. by […]
Spartanburg, South Carolina, January 2, 2015. – Logic Ventures, LLC (“Logic Ventures”) is pleased to announce the acquisition of 100% of the shares of All Metals Service & Warehousing and All Metals Transportation and Logistics (“All Metals”), an independent, South-East based, flat rolled steel and aluminum toll-processor and end-to-end logistics provider. The acquisition comes as […]
This is the first Steel Market Update Executive newsletter of the year (we produced our first Premium newsletter on Friday of last week). I can’t even imagine the number of articles I have written about the industry since I began keeping my steel customers up to date on industry events in 2004 (and explaining why […]
As we move into the month of January all eyes will be on the December steel import data which will determine if 2014 goes down in history as the largest or second largest year for total steel imports in U.S. history. Prior to 2014 the record for the year with the most foreign steel imports […]
There is one word that comes to mind when trying to write about the status of steel prices: quiet. All is quiet as the few buyers that remain in their offices are spending precious little time buying new steel. With limited information available we have chosen to keep our price ranges and indices the same […]
All of the flat rolled price indices followed by Steel Market Update saw steel prices as continuing their decline but in larger increments than what we have been seeing over the past few weeks. Benchmark hot rolled coil pricing dropped by an average of $11 per ton. Two steel indexes, Steel Market Update and CRU, […]
Thursday is New Year’s Day and a Holiday here in the United States. Steel Market Update will not publish on Thursday but we will be back to our normal schedule on Sunday, January 4, 2015. We will publish a Premium supplemental issue of our newsletter on either Wednesday or Friday of this week with Key […]