US light-vehicle (LV) sales slipped to an unadjusted 1.273 million units in July, down 2% vs. a year-ago, the US Bureau of Economic Analysis (BEA) reported. The year-on-year (y/y) decline in domestic LV sales came despite a 4.2% month-on-month (m/m) rise.
The countdown is on! In less than two weeks, we’ll kick off the 2024 SMU Steel Summit. This year is poised to be the best attended yet. More than 1,350 delegates have already registered – so we’re within sight of last year’s record number of nearly 1,450. I’m looking forward to learning from executives across […]
Russel Metals has completed the acquisition of seven service center locations from Samuel, Son, & Co.
Domestic steel mill output rose last week after falling for two straight weeks, according to the latest release by the American Iron and Steel Institute (AISI). Total raw steel mill production was estimated at 1,735,000 short tons (st) in the week ending Aug. 10. That’s up 13,000 st, or 0.8%, from the week prior. It’s […]
Shipments of heating and cooling equipment moved higher in June, according to the latest data released from the Air-Conditioning, Heating, and Refrigeration Institute (AHRI). June shipments increased 10% month on month (m/m) to 2.16 million units. This was a 7% boost over the same month last year. June represents the best monthly shipment rate year-to-date, […]
US drill rig activity recovered last week after slipping the prior week, according to the latest data from Baker Hughes. But Canada’s counts edged down following a five-week run-up. Despite the decline, Canada’s rig count remains near a five-month high. US rigs In the week ended Aug. 9, the number of active drilling rigs in […]
Flat-rolled steel prices have begun inflecting up on the back of mill prices hikes over the past couple of weeks. It’s a notable shift after tags slid downhill for most of the year. (There was a slight bump upward in late March/early April before the decreases resumed.) And now, after reaching levels not seen since […]
US hot-rolled (HR) coil remains cheaper than offshore material on a landed basis despite domestic tags inflecting upward lately. But the spread between domestic and foreign HR has tightened on the heels of price hikes by US mill over the past two weeks. (Visit SMU’s price increase calendar to keep track of the latest mill price announcements).
The latest figures show a 17% surge over year-ago levels and the best mark since December 2022.
Nucor intends to keep plate prices unchanged with the opening of its September order book, according to a letter to customers dated Tuesday, Aug. 6.
Ryerson has acquired Production Metals, LLC, a Monroe, Conn.-based aluminum, stainless, and specialty steel distributor, for an undisclosed sum.
The construction sector added 25,000 jobs in July, driven by improved wage gains according to the Associated General Contractors of America (AGC).
Construction spending in the US in June was slightly lower, declining for the second straight month. Despite the decline it increased notably year on year (y/y).
The price gap between US cold-rolled (CR) coil and imported CR tightened marginally after falling to a 10-month low in late July.
The latest SMU market survey results are now available on our website to all premium members. After logging in at steelmarketupdate.com, visit the pricing and analysis tab and look under the “survey results” section for “latest survey results.” Historical survey results are also available under that selection. If you need help accessing the survey results, or if your […]
US manufacturing activity contracted for a fourth straight month in July, as reported in the latest release from the Institute for Supply Management (ISM). The Index has indicated contraction in the manufacturing sector for 20 of the last 21 months.
The premium between US hot-rolled (HR) coil and offshore hot band prices narrowed this week as it appears domestic tags might have reached a bottom.
SunCoke Energy Inc.’s earnings improved in the second quarter, with the company citing strong performances in its coke-making and logistics segments.
SMU’s sheet price was largely flat this week, an unusual sight for the better part of the past four months. The same trend was seen for tandem products and plate as well.
The latest SMU Community Chat webinar reply is now available on our website to all members. After logging in at steelmarketupdate.com, visit the community tab and look under the “previous webinars” section of the dropdown menu. All past Community Chat webinars are also available under that selection. If you need help accessing the webinar replay, or if your company […]
SMU’s Key Market Indicators include data on the economy, raw materials, manufacturing, construction, and steel sheet and long products. They offer a snapshot of current sentiment and the near-term expected trajectory of the economy. All told, nine key indicators point lower, 16 are neutral, and 13 point higher. One thing worth noting: The nine indicators pointing lower are all lagging indicators. Many of those pointing upward are leading indicators.
The price gap between US cold-rolled (CR) coil and imported CR has fallen to a 10-month low as domestic tags continue to drift lower. Domestic CR coil prices averaged $920 per short ton (st) in our check of the market on Tuesday, July 16, down $40/st from the week before. CR tags are now down […]
The latest SMU market survey results are now available on our website to all premium members. After logging in at steelmarketupdate.com, visit the pricing and analysis tab and look under the “survey results” section for “latest survey results.” Historical survey results are also available under that selection. If you need help accessing the survey results, or if your […]
US light-vehicle (LV) sales fell to an unadjusted 1.32 million units in June, down 3.4% vs. year-ago levels, the US Bureau of Economic Analysis (BEA) reported. The year-on-year (y/y) dip in domestic LV sales came in with a 4% month-on-month (m/m) decline.
North American auto assemblies ticked down by nearly 6% in June after reaching a nine-month high in May, according to LMC Automotive data. Assemblies were also down 1.4% year on year (y/y).
US hot-rolled (HR) coil prices this week drifted further below offshore hot band prices on a landed basis. The premium is now near a two-year low. SMU’s check of the market on Tuesday, July 16, put domestic HR coil tags at $640 per short ton (st) on average, down $10/st from last week. Stateside hot […]
Offshore cold-rolled (CR) coil remains cheaper than domestic product. The gap continues to tighten, however, as US CR coil prices slip to a nine-month low. Domestic CR coil tags averaged $960 per short ton (st) in our check of the market on Tuesday, July 9, down $5/st from the week before. CR tags are now […]
US hot-rolled (HR) coil prices continued to drift lower this week, falling further below imported hot band tags on a landed basis. SMU’s check of the market on Tuesday, July 9, put domestic HR coil tags at $650 per short ton (st) on average, down $15/st vs. last week. Domestic HR coil prices are now […]
The latest SMU Community Chat webinar reply is now available on our website to all members. After logging in at steelmarketupdate.com, visit the community tab and look under the “previous webinars” section of the dropdown menu. All past Community Chat webinars are also available under that selection. If you need help accessing the webinar replay, or if your company […]
Commercial planning, specifically data center demand, drove the Dodge Momentum Index (DMI) higher in June. The DMI registered 198.6 last month, 10.4% above May’s revised reading of 179.9, Dodge Construction Network (DCN) reported on Tuesday. This is also a 7% boost over year-ago levels. The DMI tracks the value of nonresidential construction projects entering the […]