Canada will no longer accept imports of Russian aluminum and steel, Chrystia Freeland, Deputy Prime Minister and Minister of Finance of Canada, announced on March 10. “Through regulatory amendments under the Special Economic Measures (Russia) Regulations, the importation of all Russian aluminum products, such as unwrought aluminum, aluminum sheets, and finished products including containers and other […]
Rig counts dropped in Canada and the US this week, according to data from oilfield services company Baker Hughes. The total US rig count was 746 for the week ended March 10, down three rigs from the week prior. The number of active oil rigs in the US fell to 590, down two from the prior […]
How many different ways can we write about pricing increases? I had to look at my thesaurus at one point in an attempt to diversify my choice of words. There are plenty of charts and data that reflect how dynamically pricing has changed over the last month. A good explanation is key to making it digestible to […]
SMU polled steel buyers on a variety of subjects on Monday and Tuesday of this week, including current and future steel prices, inventory strategies, supply, demand, and new mill capacity. Rather than summarizing the comments we received, we are sharing some of them in each buyer’s own words. We want to hear your thoughts, too! […]
Ryerson has acquired metals processor and distributor BLP Holdings LLC (BLP). BLP consists of three Houston-based companies: Absolute Metal Products, Metal Cutting Specialists, and Houston Water Jet. Terms of the deal were not disclosed. “BLP and its divisions offer advanced processing solutions aligned with our commitment to growing our high-margin, value-added business,” said Alan Singleton, president […]
The international rig count was up by 14 in February, helping to offset recent declines in the US, according to data from oilfield services company Baker Hughes. The total US rig count was 749 for the week ended March 3, down four rigs from the week prior. The number of active oil rigs in the US […]
Weekly pricing increases are giving a new reason to have the “Sunday Scaries.” But as we wind down this week, all is quiet on the western front, so far. With regular news of price hikes, hearing mixed opinions from the market is no surprise. For every optimistic view, there’s a louder pessimistic one. We have […]
Steel mill lead times are following prices as they continue to trend upward, according to SMU’s latest market survey. SMU’s hot-rolled lead time is approximately six weeks, up from 5.4 weeks in our last market check two weeks ago. The result is notable because it marks a second consecutive and significant gain. Recall that lead times had been steady just below […]
Demand for services from US architecture firms declined for the fourth consecutive month in January, according to the latest report from the American Institute of Architects (AIA). The January monthly AIA Architecture Billings Index (ABI) score of 49.3 reflects a small increase over December’s 47.5 but remains below 50. Recall that the ABI is […]
The US and Canadian rig counts decreased again last week, but they remain elevated compared to a year ago, according to data from oilfield services company Baker Hughes. The total US rig count was 753 last week, down seven rigs from the week prior. The number of active oil rigs in the US fell to 600 […]
The US government will impose a 200% tariff on aluminum products of Russian origin starting on March 10, the Biden administration announced Friday. Additionally, starting on April 10, a 200% ad valorem tariff will be applied to products that contain any amount of primary aluminum used in the manufacturing of aluminum products that are smelted or cast in Russia. The […]
Last week I talked about lead times and price increases. After the week we’ve had, I could easily copy and paste the same sentiments. (Although I don’t think I’m allowed to publish some of what I’ve heard lately.) Aside from the obvious reasons, price increases come with some extra baggage for many organizations. A few […]
SMU polled steel buyers on a variety of subjects on Monday and Tuesday of this week, including current and future steel prices, inventory strategies, supply, demand, and new mill capacity. Rather than summarizing the comments we received, we are sharing some of them in each buyer’s own words. We want to hear your thoughts, too! […]
Galvanized sheet continues to be in high demand, according to members of the Heating, Air-Conditioning & Refrigeration Distributors International (HARDI) Sheet Metal/Air Handling Council. Since the January HARDI meeting, prices have increased, lead times have extended, scrap is up, and zinc is down. Despite the roller coaster, HARDI members remain bullish on demand in general. […]
Helping out with chores as a kid is something many of us do. But how often do your chores lead to a life-long career? Eric Daniel, general manager of Metalwest locations in Colorado, New Mexico, and Arizona, took doing chores to new heights. Steel Market Update interviewed Eric and learned how he’s made his career […]
The US and Canadian rig counts decreased slightly last week, but they remain sharply up compared to a year ago, according to data from oilfield services company Baker Hughes. The total US rig count was 760 last week, down one from the week prior. The number of active oil rigs in the US slipped to 607 […]
It seems like price increases are all the rage these days. But as the week comes to an end, so have the announcements. The new hot topic is lead times. Many will say that lead times and pricing move together. Typically, they do. But word on the street is we are not living in typical […]
Steel mill lead times, following recent pricing moves, have pushed upwards, according to SMU’s latest market survey. SMU’s hot-rolled lead time is approximately 5.4 weeks, up from 4.9 weeks at our last check of the market two weeks ago. The result is notable because lead times have been just below five weeks since the beginning of […]
US apparent steel supply rose 2% in December to 8.2 million net tons compared to the previous month, according to data from the US Department of Commerce and the American Iron and Steel Institute (AISI). Apparent steel supply is determined by combining domestic steel mill shipments and finished US steel imports, then deducting total US […]
US steel exports decreased in December compared to November, according to the latest US Commerce Department data. December’s exports total stood at 592,060 tons vs. 697,447 tons the previous month. December was the lowest volume month for 2022. In comparison to recent years, export levels were relatively high for the majority of 2022. Of our six monitored product groups […]
US heating and cooling equipment shipments increased in December, according to recently released data from the Air Conditioning, Heating, and Refrigeration Institute (AHRI). Total shipments in December were 1.677 million units, consistent with shipments in November but down 9% compared with the same month last year. November and December now represent the lowest shipment rates […]
Steel mill lead times have remained flat despite rising prices, according to SMU’s latest market survey. SMU’s hot-rolled lead time is approximately 5 weeks, unchanged from our last check of the market two weeks ago. Cold-rolled lead times remained at roughly 6.6 weeks, similar to two weeks ago. Galvanized inched up to 6.3 weeks from 6.1 weeks. […]
US Steel Corp. has completed the foundation, along with the first placement of structural steel, at its direct-reduced (DR)-grade pellet production facility in Keewatin, Minn. Completion of the $150-million Keetac project is expected later this year, with first pellets produced in 2024, the company said. US Steel broke ground on the facility in Q3 2022, as […]
It’s always interesting to take a peek behind the curtain. For Michael Cowden, managing editor of Steel Market Update (Hey, that’s us!), it’s a common experience. As a seasoned journalist, Michael is no stranger to asking the tough questions. Multiple times a year he moderates panel discussions, live interviews, hosts workshops, and speaks at various industry functions. […]
Editor’s note: Steel Market Update is pleased to share this Premium content with Executive members. For information on how to upgrade to a Premium-level subscription, email info@steelmarketupdate.com. The Energy Information Administration’s (EIA) January Short-Term Energy Outlook (STEO) was released earlier this month, forecasting spot prices, production, and inventories for crude oil and natural gas. It […]
The Canadian rig count increased again, and US rig count was unchanged, according to data from oilfield services company Baker Hughes. The number of oil and gas rigs in operation is important to the steel industry because it is a leading indicator of demand for oil country tubular goods (OCTG), a key end-market for steel […]
SMU polled steel buyers on a variety of subjects on Monday and Tuesday of this week, including current and future steel prices, inventory strategies, supply, demand, and new mill capacity. Rather than summarizing the comments we received, we are sharing them in each buyer’s own words. We want to hear your thoughts, too! Contact becca@steelmarketupdate.com to […]
We’re less than two weeks away from the Tampa Steel Conference. It’s not too late to register, but you should do it ASAP. The event will be at the Tampa Marriott Water Street hotel on Sunday-Tuesday Feb. 5-7. Approximately 445 people have already registered, which is more than total attendance last year. New companies are being added […]
US apparent steel supply dropped 6% in November to 8 million net tons compared to the previous month, according to data from the US Department of Commerce and the American Iron and Steel Institute (AISI). Apparent steel supply is determined by combining domestic steel mill shipments and finished US steel imports, then deducting total US […]
Demand for galvanized sheet is stable, according to members of the Heating, Air-Conditioning & Refrigeration Distributors International (HARDI) Sheet Metal/Air Handling Council. A few high points from this month’s meeting are that prices have climbed for the first time since April, import levels are low, and the spread between hot-rolled (HR) and galvanized material is […]