ArcelorMittal USA is in the process of changing up production at its Cleveland mill. The company plans to transfer the production of cold-rolled annealed steels produced at ArcelorMittal Cleveland to its operations in East Chicago and Burns Harbor, Ind. The product transfer plan is in development with targeted completion by the end of June. While […]
The fire at AK Steel’s Middletown Works has had little effect on the steel market, at least so far, report service center executives polled by Steel Market Update. Firefighters from four departments rushed to the mill on Saturday morning to find that a ladle had malfunctioned, releasing liquid steel into the facility, igniting a large […]
Last year was a record breaker for Steel Dynamics in multiple areas. The company reported records for steel shipments, fabrication shipments, net sales, operating income and EBITDA. Annual net income totaled $813 million compared to $382 million in 2016. Net sales for the full year totaled $9.5 billion compared to $7.8 million the previous year. […]
Bill Hickey is taking a step back from his day-to-day duties at Lapham-Hickey Steel and handing over the reins to the fourth generation of family management. Hickey retains the title of company chairman as his two sons step up to more senior management positions. “The next generation is taking over operation of the business, and […]
U.S. service centers shipped 38.779 million tons of steel products in 2017, an increase of 3.8 percent compared with full-year 2016, according to the Metals Service Center Institute’s December Metals Activity Report. Shipments of carbon flat roll and plate saw single-digit increases over the prior year, while shipments of pipe and tube products saw a […]
Steel shipments by Canadian service centers in December totaled 280,100 net tons, down 29.8 percent from the previous month, and down 3.4 percent from December 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 14,700 tons per day in December (a 20-day month), down from 19,000 tons per day […]
NLMK USA’s 2017 sales hit an all-time high of 2.25 million metric tons (2.48 million net tons), a surge of 21 percent, supported by demand from pipe manufacturers, construction companies and machine builders. Pricing for steel products in the U.S. grew by 15-19 percent compared to 2016. Growth was also positively impacted by the re-start […]
Demand is good heading into 2018, mill prices are on the upswing and trade cases promise to keep low-priced imports at bay. So why aren’t distributors who sell galvanized steel products to the HVAC market happier? Members of the Heating, Air-conditioning, and Refrigeration Distributors International (HARDI) reported that market conditions remain highly competitive despite price […]
Union workers at Canadian steel mill Algoma are seeking a cut of the company in return for concessions in contract negotiations. “It was made clear…during the December 2016 negotiations with the consenting creditors that if the members were called upon to make monetary concessions and/or to help Algoma mitigate business risk, then in keeping with […]
United Steel Supply, Austin, Texas, has acquired Paramount Coils, Inc., and Alpine Building Materials, LLC. The acquisition of the two companies gives United Steel Supply coast-to-coast coverage and distribution in the United States. The two brands will assume the United Steel Supply name. Paramount Coils has locations in both Springdale, Ark., and Kingsbury, Ind., while […]
Nucor will shift production at subsidiary Kirby Building Systems to Portland, Tenn., laying off approximately 100 production workers. The shift in operations reflects production changes in the Nucor Buildings Group, which manufactures custom-engineered and standard metal buildings and components.” “In the coming months, Nucor will be transferring all production of our American Buildings Company (“ABC”) […]
Nucor’s Sheet Mill Group has informed customers of a change in the index used to calculate scrap and raw material surcharges. It could affect steel pricing beginning with the January 2018 index settlement price, which determines the February 2018 Nucor surcharge for some customers. See the letter below:
Operational problems this past fall impacted Algoma Steel earnings and the mill’s winter build-up of raw materials, according to the latest report from CCAA bankruptcy monitor Brian Denega. Delays on a stove rebuild project along with an unplanned shutdown of the blast furnace at the end of November affected Algoma’s production and shipments. The rebuild […]
Commercial Metals Company (CMC) has agreed to buy Gerdau’s rebar operations in the United States for $600 million. The acquisition includes 33 rebar fabrication facilities, as well as steel mills in Knoxville, Tenn.; Jacksonville, Fla.; Sayreville, N.J.; and Rancho Cucamonga, Calif., with annual mill rolling capacity of 2.5 million tons. The addition of the Gerdau facilities will bring CMC’s global […]
A steel slab mill in Pennsylvania plans to welcome a complementary industry to its grounds. U.S. Steel has leased 10 acres of land at its Edgar Thomson Plant at Mon Valley Works to Merrion Oil and Gas for the purpose of gas drilling and fracking in the Marcellus shale region. The agreement reportedly will provide […]
Steel Dynamics Inc. provided guidance on fourth-quarter earnings, predicting a lower sequential quarter. Planned outages at the company’s flat rolled divisions resulted in higher costs and lower value-added shipments, reducing pretax earnings by approximately $27 million. Flat rolled steel pricing declined at a steeper rate than prices for scrap raw material. The long products division […]
Ratner Steel’s new Osceola, Ark., service center may be located near Big River Steel, but Big River is only one of the mills Ratner plans to use as a source for steel, said Steve Gottlieb, Ratner president and COO. “People think we will only do business with Big River, but our intention is to buy […]
Service center shipments in November declined by 2.5 percent, close to the normal seasonal change for this time of year, according to Steel Market Update’s analysis of Metals Service Center Institute data. Daily shipments in November were 2.5 percent lower than in October. On average since 2009, November has decreased by 2.1 percent from the […]
Steel shipments by Canadian service centers in November totaled 398,900 net tons, up 1.8 percent from the previous month, and up 0.2 percent from November 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 19,000 tons per day in November (a 21-day month), up from 18,700 tons per day […]
ArcelorMittal’s new headquarters in Luxembourg will be a testament to the strength and beauty of steel. The primarily steel and glass structure designed by Wilmotte & Associés will “showcase the diverse benefits of steel over other building materials,” said ArcelorMittal in a press release. Approximately 5,000 to 7,000 metric tons of steel produced in Luxembourg […]
A steelworker at ArcelorMittal Indiana Harbor died early on Monday after a golf cart-style buggy he was driving went under a stationary scrap trailer. Alfred Candena, 61, a line operator, was working with coworkers to move a strip of steel broken off from a weld on the trailer. “After initial response by coworkers, he was […]
Nucor offered fourth-quarter guidance on Wednesday, forecasting a decrease in earnings compared to the third quarter. Fourth-quarter results are expected to be in the range of $0.50 to $0.55 per diluted share compared to third-quarter consolidated net earnings of $0.79 per diluted share and comparable to year-ago earnings. Imports continue to negatively impact the U.S. […]
The Italian-Argentine industrial consortium Techint Group and its Ternium subsidiary are planning to construct a $1 billion hot rolled steel mill in Monterrey, Mexico. The mill will be part of an expansion of Techint’s industrial center in Nuevo León, where the consortium first started operations in 2013. The rolling mill will have an annual capacity […]
It’s not that unusual anymore to find a service center that has taken its value-added offerings as far as first-stage parts manufacturing. Less common is a toll processor that offers fabrication. Mississippi Steel Processing (MSP) is located on the campus of Steel Dynamics’ mill in Columbus, Miss. For the past two years, it has shared the […]
Argentinian steel pipe manufacturer Tenaris has begun full operations at its new Bay City, Texas, mill. The $1.8 billion facility southwest of Houston will provide seamless pipe for shale and gas wells in the region. “Tenaris is the architect of a new business model in the steel pipe sector,” said Germán Curá, Tenaris’ president for […]
In a news conference on Sunday, Chicago Mayor Rahm Emanuel said the city of Chicago intends to file a federal lawsuit against U.S. Steel alleging the steelmaker has violated the Clean Water Act. U.S. Steel’s Portage, Ind., mill has spilled more than its permitted amount of chromium into a Lake Michigan tributary in two incidents […]
Service center shipments in October exceeded expectations, led by long products and plate, according to Steel Market Update’s analysis of Metals Service Center Institute data. Daily shipments in October were 1.9 percent higher than in September. On average since 2009, October has decreased by 1.9 percent, therefore these latest numbers were better than the historical […]
The Metals Service Center Institute (MSCI) released service center shipment and inventories data earlier this week. According to the MSCI data, flat rolled inventories now average 2.1 months of supply based on the 104,600 tons per day shipment rate reported for the month of October. October 2017 shipments were 9.6 percent better than one year […]
Steel shipments by Canadian service centers in October totaled 391,700 net tons, up 9.8 percent from the previous month, and also up 9.8 percent from October 2016, reports the Metals Service Center Institute (MSCI). On a daily basis, total shipments were 18,700 tons per day in October (a 21-day month), up from 17,800 tons per […]
Canada’s Stelco, Inc., reported revenues totaling $1.15 billion (all figures Canadian) for the nine months ended Sept. 30, an increase of 16 percent over the prior-year period. Operating profit totaled $61 million, up from $8 million last year. The average selling price for the year to date was $814 per net ton, up from $654 […]