Steel Dynamics Inc. (SDI) posted record fourth-quarter earnings to finish a year of unprecedented profitability for domestic steel mills. And the Fort Wayne, Ind.-based steelmaker predicted that it would benefit from increased steel consumption in 2022 compared to 2021 levels. The company did not directly address a steep drop in prices that occurred in the […]
JSW Steel (USA) Inc., the U.S. subsidiary of Indian steelmaker JSW Steel Ltd., reported pretax earnings of more than $55 million in its third quarter of fiscal 2022 ended Dec. 31, 2021, outperforming year-ago results. JSW Steel’s EAF sheet mill in Mingo Junction, Ohio, reported third-quarter earnings of $42.12 million on sales of 92,557 net tons of hot […]
NLMK USA sales slipped in the fourth quarter on expectations of lower steel prices driving buyers to the sidelines. It was not only lower consumer activity that pushed NLMK USA sales volumes and prices lower, so too did the tariff-rate quota (TRQ) agreement with the European Union – which is expected to result in additional […]
U.S. metals distributor and service center Olympic Steel Inc. promoted David Gea as president of its Carbon Flat Rolled Division. Gea joined Olympic Steel in 2002 and has progressed through roles of increasing commercial and leadership responsibility, the company said, including most recently serving as regional VP for Olympic’s carbon flat rolled business in the […]
Among the attributes of the new, advanced minimill U.S. Steel plans to build in Osceola, Ark., next to its Big River Steel plant, is endless casting and rolling technology that will make the facility the first of its kind in the United States. What is endless casting and rolling, and what competitive advantages will it […]
Steel Dynamics Inc. (SDI) has commissioned the hot strip mill at its $1.9 billion steelmaking complex in Sinton, Texas, the company’s top executive said. “Both coating lines are running well. The hot strip mill has been commissioned using purchased slabs. The last component is the caster, which is in the home stretch,” SDI President and […]
Distributors who sell galvanized steel products to the construction and HVAC sectors are counting on demand remaining healthy this year to get them through a difficult period of inventory adjustments amid sharply declining steel prices. “One positive, demand is still pretty strong. We’re coming off heights we’ve never seen before,” said one member of the […]
U.S. Steel is mulling a sale of its USS-UPI LLC subsidiary in Pittsburg, Calif. – potentially to a developer without long-term interest in running the mill, according to market participants. Some employees have been told that the mill could stop operating in late 2023, they said. Nothing has been officially announced, none will be until […]
Evraz North America has taken an approximately one-week unplanned outage at its plate mill in Portland, Ore., market participants said. The downtime was needed because of problems with a reheat furnace, they said. The steelmaker has also scheduled a weeklong planned outage at the Portland plate mill in March, sources said. A company spokeswoman confirmed that […]
Nucor Corp. has confirmed that its greenfield, $2.7 billion electric arc furnace (EAF) sheet mill will be built in West Virginia. The Charlotte, N.C.-based steelmaker said the mill, expected to have capacity of three million tons per year, would be located in Mason County along the Ohio River. Additional sites in northern West Virginia are […]
U.S. Steel will invest $3 billion in a new state-of-the-art minimill in Osceola, Ark., near its Big River Steel plant. This new minimill will combine two electric arc furnaces (EAFs) with 3 million tons per year of advanced steelmaking and finishing capabilities, highlighted by the first endless casting and rolling facility in the U.S. Construction […]
West Virginia is on the cusp of announcing that it has been chosen for the site of Nucor Corp.’s new, $2.7 billion electric arc furnace (EAF) sheet mill, according to local media reports. The Charlotte, N.C.-based steelmaker said when it announced the project last September that it was considering locations in three states: Ohio, Pennsylvania […]
Commercial Metals Co. (CMC) plans to build a “micro mill” to better serve markets in the Northeast, Mid-Atlantic and Midwest. “The new micro mill will fortify our position in the large construction markets within the region and optimize CMC’s existing Eastern U.S. operational footprint,” CMC Chairman, President and CEO Barbara Smith said. The new mill […]
Commercial Metals Company (CMC) reported yet another record-breaking earnings result. The Irving, Texas-based steelmaker posted net earnings from continuing operations of $232.9 million on net sales of $2.0 billion in the first quarter of fiscal 2022 ended Nov. 30, 2021, besting the previous record set the prior quarter by more than $80 million. “Our record […]
Algoma Steel Group Inc. said it expects its third-quarter fiscal 2022 financial results to align with its previous guidance despite lower-than-expected steel shipments for the quarter. The Sault Ste. Marie, Ontario-based steelmaker shipped roughly 550,000 net tons of steel in the third quarter of fiscal 2022 ended Dec. 30, 2021, below prior guidance of 590,000 […]
U.S. Steel plans to take a nearly month-long maintenance outage in March on the B blast furnace at its Granite City Works near St. Louis, a company spokeswoman confirmed. The Pittsburgh-based steelmaker is targeting March 3-28 for the planned outage, she said. “We do not anticipate customer impact,” the spokeswoman added. Planned outages typically don’t […]
Steel Dynamics Inc. (SDI) has started up the hot end of its $1.9 billion steel mill in Sinton, Texas, according to sources familiar with the matter. The Fort Wayne, Ind.-based steelmaker has melted a limited number of heats and rolled a limited number of coils – standard practice for a new mill, they said. SDI […]
Stelco Holdings Inc. said its fourth-quarter steel shipments were negatively impacted by production challenges and unplanned outages. The Hamilton, Ontario-based steelmaker shipped roughly 625,000 net tons of steel in the fourth quarter of 2021, below prior guidance of 675,000 to 680,000 net tons. Shipments in the fourth quarter were lower than expected due to various […]
Seaport Steel, a Varsteel Company headquartered in Seattle, Wash., has acquired Oregon Metal Services in Portland. The OMS acquisition continues Varsteel’s U.S. expansion through its Seaport Steel subsidiary. Seaport Steel now offers a comprehensive range of flat-rolled and discrete plate, structural, tube and bar products along with processing services and support. It is fulfilling a […]
Stelco plans to enter the electric-vehicle (EV) battery recycling business with a new integrated shredding and hydrometallurgical refinery at its Lake Erie Works in Nanticoke, Ontario. The Canadian flat-rolled steelmaker said engineering studies for the new recycling operation are expected to be completed in mid-2022 with the plant anticipated to start up in 2023. The […]
BlueScope Steel has closed its $240 million deal for ferrous scrap recycler MetalX. With the transaction complete, MetalX will operate under the name BlueScope Recycling and Materials. BlueScope announced the deal in early November and closed it on Dec. 17, according to a statement released earlier this week. MetalX is the leading scrap supplier to […]
Continuing its aggressive growth through acquisition, Reliance Steel & Aluminum Co. has purchased Rotax Metals, Inc., a metals service center specializing in copper, bronze and brass alloys. This is the third deal announced by Reliance just this month, extending its reach in various regions and product categories. Founded in 1947 and located in Brooklyn, New […]
California Steel Industries (CSI) has opened its February order book for flat-rolled steel and decreased prices significantly, according to market participants. That’s a big change from 2021, when the Fontana, Calif.-based slab converter often increased prices substantially from one month to the next. “Customers are reminded that prices are subject to change at any time […]
Ternium USA Inc. plans to invest $98 million to increase coating capacity at its steel mill in Shreveport, La. The money will be used to add a second paint line to the Shreveport facility with capacity of 120,000 tons per year. Construction of the new paint line is expected to begin in the first quarter […]
U.S. Steel expects lower adjusted EBITDA in the fourth quarter compared to the third but a strong 2022 thanks to contract prices resetting higher. The Pittsburgh-based steelmaker forecast fourth-quarter adjusted EBITDA of $1.65 billion, down from adjusted EBITDA of $2.03 billion recorded in the prior quarter. The fourth-quarter dip represents a temporary slowdown in order […]
Steel Dynamics Inc. (SDI) has joined competitor Nucor in predicting another quarterly earnings record for the last quarter of 2021. The Fort Wayne, Ind.-based steelmaker predicted fourth-quarter earnings in the range of $5.46 to $5.50 per diluted share, according to guidance released on Thursday, Dec. 16. That’s up from $4.85 per diluted share in the […]
Worthington Industries Inc. reported net earnings of $110.3 million for the second quarter of its fiscal 2022 ended Nov. 30 on total sales of $1.2 billion. Revenues for the Columbus, Ohio-based steel processor jumped by 69% or $501.8 million from the same period last year, driven primarily by higher average direct selling prices in its Steel […]
Swedish steelmaker SSAB says its plate mill in Montpelier, Iowa, is not on for sale. “Regarding … the Iowa mill, SSAB currently has no plans to divest assets,” an SSAB Americas spokesperson said in an email to Steel Market Update. SSAB’s U.S. operations are comprised of two plate mills – one in Mobile, Ala., and […]
Nucor Corp. expects earnings this quarter to be the highest in the company’s history, surpassing the previous quarterly record of $7.28 per diluted share in the third quarter of 2021. The Charlotte, N.C.-based steelmaker predicted fourth-quarter earnings would be in the range of $7.65 to $7.75 per share. “Steel mill segment earnings in the fourth quarter of 2021 remain robust and […]
ArcelorMittal Mexico has made the first coil from the new hot strip at its steelmaking complex in Lazaro Cardenas, a port city in Mexico’s Michoacan province. Company spokespeople did not respond to requests for confirmation from Steel Market Update. But the moment was celebrated on social media by ArcelorMittal employees and executives. One example: “Congratulations […]