Flat rolled steel prices just keep ratcheting up as supplies remain extremely tight, with lead times continuing to extend and sources warning of impending shortages of some products (see related articles in this issue). Steel Market Update’s check of the market this week moves the benchmark price for hot rolled up to $770 per ton, […]
Three out of four respondents to Steel Market Update’s market trends questionnaire this week said they expect to see shortages and possible allocation of steel in the next few months. Buyers report that deliveries from all the mills are routinely 2-4 weeks late. Service centers are getting inquiries from other service centers, even competitors, who […]
Weekly raw steel production by U.S. mills totaled 1,582,000 net tons in the week ending Nov. 21. The operating rate was a fraction higher than the prior week at 71.5 percent. Despite the steady increase in production through much of 2020, the latest week’s output remains 13.2 percent behind the same week last year when the […]
Nucor Tubular Products announced Nov. 20 that it has increased pricing on all new orders for HSS, pipe, mechanical and piling products by $75 per ton as a result of rising raw material costs, strong demand and volatility of transportation costs. All orders booked prior to this announcement will be price protected for shipments through […]
Nucor Tubular Products notified customers on Friday, Dec. 4, that it has increased pricing on all new orders for HSS, pipe, mechanical and piling products by a minimum of $100 per ton as a result of rising raw material costs, strong demand and volatility of transportation costs. All orders booked prior to this announcement are […]
Steel Market Update’s latest foreign vs. domestic hot rolled steel price comparison shows that steel imports have become more enticing to U.S. buyers than in previous months, according to the latest SMU and CRU price indices. In our previous update in early November, U.S. producers had lost their price advantage over HRC imports from Far East […]
Plate prices have finally gained some traction, seeing a notable jump this past week to an average of $720 per ton, according to Steel Market Update’s latest check of the market. Nucor and SSAB Americas announced plate increases this week in hopes of maintaining that upward momentum. Flat rolled prices continued their relentless climb, with […]
California Steel Industries notified customers on Monday that its February order book is now open and it is increasing transaction prices on its flat rolled products. CSI increased pricing on spot orders of hot rolled and P&O by $50 per ton, and on orders for cold rolled and galvanized by $70 per ton, effective immediately. […]
Steel plate is likely to get more expensive, and not just because of the usual price increases. SSAB Americas informed customers on Monday that it has increased transaction prices by a minimum of $50 per ton effective on all new non-contract orders of As-Rolled Mill Plate, Cut-To-Length Plate >72”, Hot Rolled Coils >72”, Normalized Plate […]
Raw steel production by U.S. mills increased by 7,000 net tons last week. In the week ending Nov. 14, domestic steel production totaled 1,580,000 net tons, pushing the average industry capacity utilization rate up slightly to 71.4 percent. Although production continues on a slow upward trajectory, it remains 13.3 percent below the same week last year when the operating rate was […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines other metallic coated imports (mainly Galvalume) by region through September 2020. In September, OMC imports were up by 0.9 percent at the […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines hot-dipped galvanized imports by region through September 2020. In September, hot dipped galvanized (HDG) imports were down by 11.4 percent at the […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines cold rolled coil imports by region through September 2020. In September year to date, cold rolled imports were down by 13.8 percent at […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines hot rolled coil imports by region through September 2020. In September, hot rolled imports were down by 15.3 percent at the national […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines coiled plate imports by region through September 2020. In September year to date, coiled plate imports were down by 34.2 percent at […]
National level import reports do a good job of measuring the overall market pressure caused by the imports of individual products. The downside is that there are huge regional differences. This report examines cut-to-length plate imports by region through September 2020. In September year to date, cut-to-length (CTL) plate imports were down by 45.2 percent […]
U.S. raw steel production remained steady in September, up 0.8 percent to 6,587,000 net tons, as reported by the American Iron and Steel Institute. AISI’s monthly raw steel production estimates are different than the weekly estimates SMU reports each Tuesday; the monthly estimates are based on over 75 percent of the domestic mills reporting versus […]
U.S. apparent steel supply remained flat from August to September, up 0.4 percent to 7.19 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. While supply levels have improved each month since May, recall that April and May were the two lowest levels seen in the […]
U.S. steel exports continued to recover in September, rising 17 percent from August to 646,194 net tons, according to recent U.S. Department of Commerce data. Total September exports are up 83 percent compared to four months prior, when May exports were at the lowest levels seen in SMU’s 24-year data history. Total September exports are […]
U.S. steel mills shipped 6,662,904 net tons in September, a 2.0 percent increase from the 6,532,652 net tons shipped in the previous month, but a 14.2 percent decrease from the 7,767,310 net tons shipped in September 2019, reported the American Iron and Steel Institute. Shipments year-to-date totaled 60,449,359 net tons, a 16.7 percent decrease vs. […]
Flat rolled steel prices continued to rise last week, though at a modest $5-10 per ton pace. The exception was Galvalume, which jumped by $40 as demand continues to outpace supplies. The benchmark average for hot rolled coil, at $710 per ton, surpassed the $700 level, where many had expected it to peak. With demand […]
Final Commerce data shows steel imports totaled 1.26 million net tons in September, surpassing last month’s low by 33,000 tons. September imports are now at the lowest levels seen in 11 years, with the previous low occuring in September 2009 at 1.21 million tons. Recall that the lowest monthly import level in the past two decades […]
Weekly raw steel production by U.S. mills continues to climb, a trend that started back in May. In the week ending Nov. 7, raw steel production totaled 1,573,000 net tons. The capacity utilization rate rose to 71.1 percent, up from 70.0 percent the week prior. Despite the steady rise in output, the current week’s production represents […]
Among steelmaking raw materials, the prices of pig iron, scrap, zinc and aluminum have seen big gains in the past three months. Pig iron and scrap prices have seen significant increases compared to the late summer months. Iron ore and coking coal prices had widened through mid-September but have since declined, with coking coal prices […]
Steel Market Update’s latest foreign vs. domestic hot rolled steel price comparison shows that steel imports have become more enticing to U.S. buyers than in previous weeks. U.S producers appear to have lost their price advantage over HRC imports from Far East Asia, according to the latest SMU and CRU price indices. The price differentials between […]
The U.S. International Trade Administration has launched a new Steel Import Monitoring and Analysis (SIMA) System as of Oct, 13. This new system collects and publishes data on steel mill product imports and provides valuable information on steel trade within the United States. The import monitor provides an early indication on steel imports by publishing […]
Most of the industry executives polled by Steel Market Update this week reported genuine demand, not just tight supplies, pushing steel prices upward, promising even higher prices ahead. SMU estimates the current spot market price for hot rolled at $700 per ton, up by $260 over the past three months, and likely not yet at […]
Steel Market Update’s check of the market this week puts the average price for hot rolled steel at $700 per ton, a psychological milestone for the steel sector as the economy continues to make progress from the severe early effects of the COVID pandemic. This marks the 12th week in a row that flat rolled […]
California Steel Industries has opened its January order book with a considerable bump in prices. CSI notified customers on Monday that it has increased transaction prices on its flat rolled products by $90-100 per ton. Effective immediately, unconfirmed orders for hot rolled, P&O and galvanized increase by $90 per ton, while cold rolled prices increase […]
Domestic mills continue to increase steel production as the economy rebounds from the coronavirus, with the capacity utilization rate topping 70 percent again for the first time since late-March. In the week ending Oct. 31, raw steel production totaled 1,557,000 net tons, at a mill operating rate of 70.4 percent, up from 69.7 percent the […]