Domestic raw steel production edged higher in the week ending Nov. 20, increasing for the second consecutive week. U.S. mills produced an estimated 1,861,000 net tons during the week, while the average mill utilization rate rose to 84.3%, according to the American Iron and Steel Institute (AISI). Production was up an estimated 0.3% compared to […]
Nucor has decreased steel pipe and tube prices by $100 per ton ($5 per hundredweight) effective immediately. The Charlotte, N.C.-based steelmaker said the drop applied equally to all new orders of hollow structural sections (HSS), pipe, mechanical tubing, and piling products. “This decrease is a result of normalized raw material costs and reduced transportation volatility,” […]
SSAB Americas, in a leading move, has increased plate prices by $50 per ton ($2.50 per hundredweight). The price hike is effective immediately for all new spot orders, the Mobile, Ala.-based steelmaker said in letters to customers on Monday, Nov. 22. The amount of the increase is $60 per ton CAD for customers in Canada. The […]
By Greg Wittbecker, Advisor, CRU Group Prices are higher…. why aren’t we seeing more aluminum production? One of the most natural questions being asked in the world of aluminum is “with LME prices up so much year on year, why aren’t we seeing more capacity coming back to life?” It IS an appropriate question and […]
Sheet and plate prices are nearing parity for the first time in about a year, the latest sign of a market in flux. Below is a good way to visualize that trend. The chart below maps out the spread between sheet and plate going back to 2017. If we rewind to mid-November of last […]
Prices for four of the seven steelmaking raw materials tracked in this SMU analysis declined over the last 30 days. Through Nov. 18, iron ore prices fell 27% from one month prior, aluminum prices are down 17%, zinc prices declined 15%, and coking coal prices decreased 4%. In that same time frame, shredded scrap prices […]
Editor’s note: SMU contributor Bryan Tice is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and the firm design and execute risk management strategies for clients along with providing process and analytical support. Before joining Metal Edge Partners, Bryan held a variety of commercial […]
By CRU Senior Prices Analyst Estelle Tran, from CRU’s Global Steel Trade Service, Nov. 18 In the last several weeks, U.S. sheet prices have started to decline, though prices remain well above global prices. Under pressure from imports and service centers eager to sell high-cost inventory before the end of the year, prices for processed […]
By CRU Principal Analyst Matthew Watkins, from CRU’s Global Steel Trade Service, Nov. 18 There was a big price collapse in China over the past month. HR coil export prices have fallen by 13% since October and rebar is down by 10% in the same period. For HR coil, this means that China has returned […]
Steel Market Update’s poll of buyers on Monday and Tuesday showed further small declines for flat rolled steel prices, while plate prices were up a bit. No sign yet of a sharp correction as prices continue to ease downward. The benchmark price for hot rolled is now down to $1,830 per ton, $25 lower than […]
By CRU Senior Analyst Thais Terzian and Analyst Chris Bandmann, from CRU’s Crude Steel Market Outlet, Nov. 15 There is currently a lot of market discussion that the EU may act to restrict scrap exports. Here we look at who could be hurt and who might see opportunities. Other regions have already acted to protect […]
Flack Global Metals (FGM) is now a member of the CME Group, making it the first North American metals distributor to join the derivatives marketplace, the company said on Tuesday. The Cleveland-based service center said the move will allow its risk management team to provide even greater liquidity to buyers of flat-rolled products as well […]
Raw steel production by U.S. mills rebounded after falling for three straight weeks, and down five out of the last seven weeks. Domestic raw steel production was estimated at 1,856,000 net tons in the week ending Nov. 13, while the average mill utilization rate rose to 84.1%, according to the American Iron and Steel Institute […]
Hot-rolled coil prices continue to slide. And galvanized base prices are holding more or less steady. What gives? Check out the slide below. The green line is galvanized base prices. The blue line is lead times. Prices are on the left-hand side of the slide. Lead times are on the right. Prices have been around […]
Imports of less-expensive sheet and plate products have been on the rise for the past five months as buyers continue to seek relief from record-high steel prices in the U.S. September Commerce Department data show imports’ share of the U.S. flat-products markets at their highest levels in the past 4-5 years. Imports’ share of total […]
By Greg Wittbecker, Advisor, CRU Group Quotas in exchange for exemption, a bad precedent for other countries There has been much written about the new détente between the EU27 and the USA in the aftermath of the deal to suspend duties on European steel and aluminum. There are also reports that something may also be […]
September apparent steel supply increased by 90,000 tons over August to 9.92 million net tons, according to the latest U.S. Department of Commerce and American Iron and Steel Institute data. This is the highest supply level seen in more than six years, going back to January 2015 when supply surpassed 10 million tons. September supply is up […]
The following article on the hot rolled coil (HRC), scrap and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Hot Rolled Spot HR has declined each of the last three Wednesday’s for a total loss of $86/ST. Spot HR has lost […]
Steel Market Update is pleased to share this Premium content with Executive members. For information on upgrading to a Premium-level subscription, email Info@SteelMarketUpdate.com. U.S. raw steel production in September eased 4.9% from August to 7.89 million net tons, a 408,000-ton seasonal decline, according to American Iron and Steel Institute data. One month prior, production had reached a 20-month high […]
By CRU Principal Analyst Josh Spoores, from CRU’s Steel Sheet Products Monitor, Nov. 10 Global sheet prices have continued to fall, though declines have not been consistent across all regions. Overall, CRU’s Global Flat Products Steel Price Indicator (CRUspi flats) fell for the second consecutive month, declining by 2.9% and is now at its lowest […]
U.S. steel exports decreased 4% from August to September to 732,000 tons, according to the latest U.S. Department of Commerce data. September marks the lowest monthly export level seen in six months. Recall that in March and June of this year, we saw the two highest monthly export levels in the last three years (790,000 and 778,000 […]
Even as domestic prices ease, foreign steel imports continue to tempt U.S. buyers with potential discounts of 24-43%, according to Steel Market Update’s latest comparison of domestic and foreign hot rolled steel prices. Foreign hot rolled steel prices are now theoretically $452-801 per ton cheaper than domestic steel, after taking freight costs, trader margins and tariffs […]
Steel Market Update’s check of the market this week shows both flat rolled and plate prices declining by another $10-25 per ton. The declines were not unexpected and are in line with the downtrend that has materialized in the last two months as seasonal dips in demand and competition from imports put pressure on domestic […]
Ferrous scrap prices saw an unexpectedly big jump in November, with shredded scrap selling as high as $75/GT above October levels. Prime scrap rose $20/GT, sources tell Steel Market Update. Observers were expecting higher prices in November on strong export demand and some seasonal tightening of supplies, but were surprised by the size of the […]
On Monday, Nov. 8, NLMK notified customers of an upward revision to their galvanized steel coating extras, effective on orders starting January 2022. Zinc prices soared in October, reaching a record high of $1.74 per pound on Oct. 15. Prices have since declined, down to $1.48 per pound as of Nov. 9. Recall that the last round of […]
By CRU Principal Analyst Erik Hedborg, from CRU’s Steelmaking Raw Materials Monitor, Nov. 9 Iron ore prices remain under pressure as Chinese steel production levels remain low and iron ore inventories continue to pile up, both at ports and at steel mills. A price of $92 /dmt is the lowest seen since May 2020, and […]
Raw steel production by U.S. mills slipped for the third straight week, now down five out of the last six weeks. Domestic raw steel production was estimated at 1,841,000 net tons in the week ending Nov. 6, while the average mill utilization rate dipped to 83.4%, its lowest reading since the week of July 10, […]
By Greg Wittbecker, Advisor, CRU Group Since I spoke at the Fall Management Meeting, the market has continued to experience tremendous volatility and new variables to consider. CRU has recently updated its expectation for market balances, premiums and LME prices. These forecasts can be seen in detail through our Aluminum Market Outlook subscription. Here are […]
SMU contributor Tim Stevenson is a partner at Metal Edge Partners, a firm engaged in Risk Management and Strategic Advisory. In this role, he and his firm design and execute risk management strategies for clients along with providing process and analytical support. In Tim’s previous role, he was a Director at Cargill Risk Management, and […]
Final Census data shows that September foreign steel imports increased 17% from August to 3.26 million net tons and a 28-month high. October import licenses are currently at 2.47 million tons as of Nov. 4, down 24% from September and down 11% compared to August. The last time total monthly import levels were this high was April […]