We had three price announcements and at least one verbal announcement on flat rolled steel since the week began. Everyone is wondering if the other steel mills will follow and what will the base prices be when the dust settles? Based on what we have been hearing from steel buyers today, the suggested minimum base […]
Three mills have made price increase announcements of $30 per ton on all flat rolled products produced by those mills. The three mills are Nucor, NLMK USA and USS/POSCO (UPI) on the West Coast. On Monday morning Nucor made it official and was the first mill to announced a $30 per ton ($1.50/cwt) price increase […]
For the week ending February 18, 2017, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,766,000 net tons of raw steel, a 1.6 percent increase over the previous week and a 3.3 percent increase over the revised rate from the same week one year ago. The estimated capacity utilization rate […]
Employees at a zinc processing facility in Quebec have gone on strike raising concerns for metal producers that use the alloy in galvanized steel. CEZinc, in Salaberry-de-Valleyfield, Quebec is co-owned by Glencore and Noranda Income fund. Employees say the company demanded major pension concessions, despite an over-funded pension plan, and has rebuffed union suggestions for […]
A large flat rolled steel service center shot me a note late on Friday advising a steel mill had told them earlier in the day to expect a $40 per ton price increase as soon as Monday of this week. At the same time the customer was told if scrap prices in March increase by […]
This is the second in a series of new reports on global trade of hot rolled and cold rolled products. In the future these articles (the first one was published on Tuesday, February 14th) will be part of our Premium level products and will be published in our Premium supplemental newsletter. If you would like […]
Flat rolled steel spot prices have recently given back some of the gains made since the first price announcements were announced by U.S. steel mills in late October. In the past 13 weeks flat rolled prices increased by $160 per ton or more depending on product and the starting point for any specific steel buyer. […]
The following calculation is used by Steel Market Update to identify the theoretical spread between foreign hot rolled steel export prices and domestic (USA) hot rolled coil prices. We want our readers to note that we have made a decision to replace SteelBenchmarker as the primary data provider of foreign hot rolled coil prices. We […]
The following article on the hot rolled coil (HRC) futures markets was written by David Feldstein. As the Flack Global Metals director of risk management, Dave is an active participant in the hot rolled coil (HRC) futures market and we believe he will provide insightful commentary and trading ideas to our readers. Besides writing Futures […]
We believe that miss-information (or lack of) about regional import volumes is often used to influence purchase decisions. Our intent with this analysis of tonnage by district of entry is to describe in detail what is going on in a company’s immediate neighborhood and thus provide a negotiating advantage for our premium subscribers. We are […]
Flat rolled prices held their own this week and remained at, or very near, last week’s levels. At the moment we are seeing the mills as willing to negotiate prices on some items but, at the same time we are see some strengthening as scrap prices have firmed up over the past week and may […]
The following article is the opinion of John Packard, Publisher, Steel Market Update. I haven’t gone back and reviewed the records as to how many times flat rolled steel prices moved higher after a quick run up followed by a stable to slightly down market for a couple of weeks. Probably less than the fingers […]
For the week ending February 11, 2017, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,738,000 net tons of raw steel, a 0.9 percent increase over the previous week and a 1.7 percent increase over the revised rate from the same week one year ago. The estimated capacity utilization rate […]
Iron ore has seen a huge spike in pricing, soaring $5.61 to $92.23 per tonne on Tuesday, Feb. 14 for a 30 month high. Iron ore stockpiles are up at ports but not the high grade ore that is being sought by Chinese steelmakers. Efforts to reduce pollution and curb overcapacity has led to the […]
We believe that to understand the forces acting on the US steel import market it is necessary to examine global trade flows. We present here episode one of our investigation into the global trade of hot rolled coil and cold rolled coil and the US’s position in the big picture. The source of this data […]
We saw some “minor” slippage in flat rolled steel pricing this past week. When reviewing Platts (SteelBenchmarker did not report prices this past week) and our own steel indices we saw movement in hot rolled, cold rolled as stable, movement in galvanized and Galvalume and plate were stable. Hot rolled prices were down $10 per […]
According to the latest data released from the U.S. Department of Commerce and the American Iron and Steel Institute, apparent steel supply for the month of December 2016 was 8,622,171 net tons. Apparent steel supply is calculated by adding domestic steel shipments and finished US steel imports, then subtracting total US steel exports. December apparent […]
Even though the U.S. Department of Commerce is reporting foreign steel imports at high levels, imported steel is getting more expensive and, in some cases, getting harder to find. SMU sources, both steel trading companies and buyers of foreign steel here in the United States, are expressing reservations about the future of foreign steel imports. […]
“Sanity is back in the seabourne iron ore market,” said Cliffs Natural Resources CEO Lourenco Goncalves in comments during the Cliffs earnings call on Thursday. After the departure of three key executives in the Australian ore market, iron ore prices doubled and Rio Tinto, Vale and BHP are exhibiting disciplined behavior which will support strong […]
The following article on the hot rolled coil (HRC) steel and financial futures markets was written by Jack Marshall of Crunch Risk LLC. Here is how Jack saw trading over the past week: Steel HR futures consolidate in quiet trading week as the market absorbs the anticipated first decline in the HR index since the […]
The U.S. Department of Commerce released the Final Census Data for foreign steel imports for the month of December 2016. We now have the 12-month moving average (12MMA) for calendar year 2016 as well as the 3-month moving average for the last 3 months (4Q) 2016. The January numbers are based on license data which […]
Licensed data for January was reported by the Steel Import Monitoring System of the US Commerce Department on January 7th. An explanation of the methodology that we at SMU use to analyze the trade data is given at the end of this piece. All volumes in this analysis are reported in short tons. Total rolled […]
December steel exports totaled 726,847 net tons (659,385 metric tons), down 0.3 percent over November but up 0.2 percent from December 2015. This is the lowest export level seen since December 2015 when 658,362 tons were exported. Total December figures are below the thee month moving average (average of October, November, and December 2016 figures) […]
Steel buyers are telling Steel Market Update that there are a few steel mills “looking for orders” and that flat rolled steel prices are “somewhat negotiable with tons” but, otherwise, the steel mills are doing a good job of holding the line on prices. We have seen a couple of drops in pricing due to […]
The following article is the opinion of Steel Market Update (SMU) founder and publisher, John Packard. There is a new kid in town, his/her name is Big River Steel. No other steel mills like BRS because they are taking market share and, well, everyone wants to keep all of their toys. Big River Steel Arkansas […]
The ferrous scrap markets have been all about doom and gloom up until the past couple of days. Obsolete grade and shredded scrap were reported trading down $25 per ton in Brazil. Prime grades were down $10 per ton. Our sources were telling us export prices were down and the exporters off the east coast […]
For the week ending February 4, 2017, the American Iron & Steel Institute (AISI) estimated the U.S. steel industry produced 1,723,000 net tons of raw steel, a 0.7 percent decrease over the previous week but a 3.5 percent increase over the revised rate from the same week one year ago. The estimated capacity utilization rate […]
Over the weekend, we were able to discuss the status of ferrous steel scrap negotiations for February with a couple of scrap dealers as well as one individual associated with the pig iron markets. The Detroit areas mills were the first to settle and the decline in shred and obsolete grades was not as dramatic […]
The U.S. Department of Commerce provided updated license and census data which indicates foreign steel imports are trending lower. December imports of foreign steel are totaling 2,685,641 tons while January is trending toward 2.7 million tons based on license data through the end of the month. Items that are trending lower are: Semi-finished steels of […]
The American Iron & Steel Institute (AISI) recently reported final U.S. raw steel production estimates for the month of December 2016. The monthly estimates are different than the weekly estimates we report in our Tuesday issues; the AISI bases the monthly estimates on over 75 percent of the domestic mills reporting vs. only 50 percent […]