Contract negotiations between Stelco and the United Steelworkers union are progressing slowly, and as a result, a third group of Stelco steelworkers has filed for conciliation and scheduled a strike mandate vote, a union official said. Members of the USW Local 8782-03, responsible for Stelco’s pickling operations, have now joined the USW Local 8782 and […]
ArcelorMittal Mexico has started up a new hot skin pass mill at its new hot rolling mill in Lázaro Cárdenas, Michoacán. The hot skin pass mill has come into operation seven months after the new $1 billion, 2.75-million-short-ton-per-year hot rolling mill produced its first coil. “We are very happy to reach today an important step […]
As it prepares to take over the two blast furnaces at US Steel’s Granite City Works in Illinois, SunCoke Energy is joining the contract negotiations in Pittsburgh that started this week between US Steel and the United Steelworkers union. It was announced last month that SunCoke and US Steel have signed a non-binding letter of […]
Evraz North America has completed fracture toughness testing of its high-frequency welded line pipe for use in hydrogen transmission. The tested line pipe was produced from steel melted at Evraz’s EAF steel mill in Regina, Sask., Canada, and the welded pipe was also completed at the Regina mill. The company expects to complete full qualification […]
A second local United Steelworkers (USW) chapter at Algoma Steel has voted to authorize a strike. Local 2274 held a vote on the matter late last week, and 95.1% voted in favor of a strike mandate, according to an update to union members. Algoma, a Canadian sheet and plate mill, is represented by two unions: […]
The United Steelworkers (USW) is preparing to start master contract bargaining with US Steel in the first half of July, according to communications sent to union members. Local union chapters will send representatives to the master negotiations, which are being held in Pittsburgh and which will likely begin next week, a union spokesman told Steel […]
The local United Steelworkers (USW) chapter representing hourly workers at Algoma Steel has voted nearly unanimously to authorize a strike. Local 2251 held a vote on the matter on Monday, July 4, and 99% voted in favor of a strike mandate, according to an update to union members. Algoma, a Canadian sheet and plate mill, […]
ArcelorMittal SA has completed a deal to acquire an 80% stake in a south Texas hot-briquetted iron (HBI) plant built by Austrian steelmaker Voestalpine. The Luxembourg-based steelmaker said the deal was finalized following the receipt of customary regulatory approvals on Thursday, June 30. The agreement, announced in April, values the HBI plant – located near […]
The United Steelworkers (USW) is preparing to start master contract bargaining with Cleveland-Cliffs Inc. in mid-July, according to communications sent to union members. Local union chapters will send representatives to the master negotiations, which are being held in Pittsburgh. The USW’s current labor pact with the Cleveland-based steelmaker expires on Sept. 1. Talks will focus […]
Approximately 950 jobs could be lost at US Steel’s Granite City Works near St. Louis once the mill stops making steel, a company spokeswoman confirmed. The Pittsburgh-based steelmaker currently employs approximately 1,500 people at the mill. There would be an estimated 550 employees when the shift to pig iron production happens in 2024. “There is […]
The union representing Stelco’s Lake Erie Works in Nanticoke, Ontario, said labor talks would continue past the expiration of the current contract on Thursday. United Steelworkers (USW) Local 8782 said that the terms of the old contract, which expires on June 30, would remain in effect as negotiations continued. “Members are required to continue to […]
A second United Steelworkers union local has voted to authorize a strike at Canadian flat-rolled steelmaker Stelco. USW Local 8782, which represents the company’s steel mill in Nanticoke, Ontario, said 99.1% of its members voted on Monday in favor of the strike mandate. The moves comes after USW Local 1005, which represents Stelco’s Hamilton Works, earlier […]
US Steel plans to stop making steel at its Granite City Works near St. Louis in the second half of 2024, a company spokeswoman told Steel Market Update on Tuesday. The Pittsburgh-based steelmaker expects that the mill’s blast furnaces will switch over to pig iron production as part of a deal with SunCoke Energy Inc., […]
Steel Dynamics Inc. (SDI) announced today the creation of a joint venture with Aymium, a producer of renewable biocarbon products. Operating under the name SDI Biocarbon Solutions, LLC, SDI will hold a 55% stake and Aymium owns the remaining 45%. The company plans to create a biocarbon production facility to supply SDI’s electric arc furnace […]
Nucor Corp. completed its $3 billion acquisition of C.H.I. Overhead Doors from KKR & Co. Inc. C.H.I. is a manufacturer of residential and commercial overhead and rolling doors, also known as garage doors. It serves US and Canadian markets. The deal expands the Charlotte, N.C.-based steelmaker’s long-term strategy to expand its manufacturing model to provide […]
Business is booming for global metals plant technology and equipment provider SMS group Inc. amid growing demand for decarbonization and recycling technologies. Order intake during 2021 for the Düsseldorf, Germany-based company was at its highest level in ten years at €3.5 billion. This year that number is expected to be comparable, with the company expecting […]
Canadian flat-rolled steelmakers Stelco and Algoma face looming summer contract expirations with the United Steelworkers (USW) union. That’s well ahead of US mills, whose contracts with the USW don’t expire until Sept. 1. Here is where things stand now: Stelco The most pressing deadline is at Hamilton, Ontario-based Stelco, whose five-year agreement with the USW […]
Worthington Industries reported sharply lower profits for both its fiscal 2022 fourth quarter and its full fiscal year ended May 31, 2021. The Columbus, Ohio-based manufacturer and service center said the drop resulted partly from inventory holding losses at its steel processing division. All told, Worthington reported net earnings of $80.3 million in its fiscal […]
An innovative and collaborative study to capture carbon emissions and inject them into concrete products for permanent storage will soon begin at US Steel’s Gary Works in northwest Indiana. The University of Illinois Urbana-Champaign’s Prairie Research Institute will lead the study after receiving a research reward of almost $3.5 million from the US Department of […]
Despite falling prices and declining lead times for galvanized sheet, overall demand is still generally strong and a good reason for optimism, according to members of the Heating, Air-Conditioning & Refrigeration Distributors International on this month’s call of HARDI’s Sheet Metal/Air Handling Council. One HARDI member in the Rocky Mountain region noted that his company […]
SSAB and Shape Corp., have partnered to deliver fossil-free steel crash management and body structure systems to the US market, the steelmaker said. The Grand Haven, Mich.-based tier-one automotive supplier of lightweight body structures, will be testing SSAB’s HYBRIT steel – made from hydrogen-reduced sponge iron – for use in automotive applications. “We are excited […]
Evraz North America is idling production of large-diameter pipe at its Regina, Saskatchewan, mill due to market conditions, resulting in the layoff of hundreds of Canadian employees. “Although our overall business is strong, including demand for our other steel products, the large-diameter pipe market has been soft,” a company spokeswoman told SMU in an email on […]
US Steel Corp. expects its performance to be an all-time best for the second quarter, with all its business segments producing EBITDA similar to or better than the already strong first quarter. Second quarter EBITDA is anticipated to be approximately $1.6 billion, up from $1.337 billion in the first quarter. Adjusted net earnings per diluted […]
Strong demand is expected to continue benefiting Irving, Texas-based Commercial Metals Co. (CMC). The steelmaker posted strong results for its fiscal third quarter ended May 31, which president and CEO Barbara Smith attributed to strong operational execution and robust market conditions both in North America and Europe. The company’s fiscal Q3 net earnings of $312.4 […]
Steel Dynamics Inc. (SDI) expects its best second-quarter earnings to date for the three-month period ended June 30. Record results are projected despite lower average flat-rolled steel selling prices. The Fort Wayne, Ind.-based steelmaker expects earnings of $6.66-6.37 per diluted share in the second quarter, according to guidance figures released on Thursday, June 16. That’s […]
Nucor Corp. expects to post the most profitable quarter in its history, the company said, for its second-quarter ending July 2 earnings guidance. The Charlotte, N.C.-based steelmaker expects earnings of $8.75 to $8.85 per diluted share in the second quarter, according to figures released on Wednesday, June 15. That’s up from the previous record of […]
High steel prices continued to benefit Canadian flatrolled steelmaker Algoma Steel Group as it posted strong results for its fiscal 2022 fourth quarter and full year ended March 31. “Our strong results for the fiscal fourth quarter capped off an incredible year at Algoma, one that produced record revenues, profitability and cash flows. Relentless execution […]
Jessica T. Graziano will join US Steel Corp. as its new senior vice president and chief financial officer effective Aug. 8. Graziano comes to US Steel after spending eight years with United Rentals Inc., most recently serving as executive vice president and CFO. She also previously served as senior vice president, chief accounting officer, and […]
Nucor has agreed to acquire Summit Utility Structures LLC and a related company, Sovereign Steel Manufacturing LLC. They produce metal poles and other steel structures for utility infrastructure and highway signage, the steelmaker said. Charlotte, N.C.-based Nucor said the companies will become part of a new business unit, Nucor Towers & Structures, serving the utility, […]
Severstal is no longer shipping “anything” to the United States, a company spokeswoman said. The Russian steelmaker instead intends to “continue working with our partners who are not tied with obligations to US,” she said in an email to Steel Market Update. The comments come after the US Department of Treasury’s Office of Foreign Assets […]