Steel Products Prices North America

Raw Steel Notches Fourth Consecutive Gain: AISI
Written by David Schollaert
June 5, 2023
Raw steel production by US mills moved higher last week, increasing for the fourth consecutive week, according to data released by the American Iron and Steel Institute (AISI) on Tuesday, June 5.
Domestic production stood at 1,754,000 net tons in the week ended June 3, up 1% vs. 1,737,000 tons the previous week. Output was still behind by 0.2% from 1,757,000 tons in the same week last year.
The mill capability utilization rate was 78% last week, up from 77.2% a week earlier. Despite the continued gains, utilization was still down from 80.5% in the same week last year.
AISI said that adjusted year-to-date production through June 3 was 37,246,000 tons at a capability utilization rate of 75.5%. This is down 3.3% from the year-ago period when 38,350,000 tons were produced with an overall capability utilization rate of 80.5%.
Production by region for the week ending June 3 is below. (Note: week-over-week change is in parentheses.)
- Northeast – 140,000 tons (down 3,000 tons)
- Great Lakes – 571,000 tons (up 3,000 tons)
- Midwest – 213,000 tons (down 10,000 tons)
- South – 768,000 tons (up 24,000 tons)
- West – 62,000 tons (up 3,000 tons)
Note: The raw steel production tonnage provided in this report is estimated. The figures are compiled from weekly production tonnages provided by approximately 50% of the domestic production capacity combined with the most recent monthly production data for the remainder. Therefore, this report should be used primarily to assess production trends. The AISI production report “AIS 7,” published monthly and available by subscription, provides a more detailed summary of steel production based on data supplied by companies representing 75% of US production capacity.
By David Schollaert, david@steelmarketupdate.com

David Schollaert
Read more from David SchollaertLatest in Steel Products Prices North America

Nucor slows HRC price climb with $5/ton increase
After eight weeks of double-digit price increases on hot-rolled (HR) coil, Nucor slowed the price rise this week with an increase of $5 per short ton.

Domestic CRC prices surge ahead of imports
The price spread between stateside-produced CR and imports reached its widest margin in over a year.

Evraz raises plate prices $160/ton
Evraz North America (NA) has followed Nucor and SSAB with a plate price increase of its own: up $160 per short ton (st). The increase was effective immediately for all new orders of carbon, high-strength low-alloy, and normalized and quenched-and-tempered plate products, as well as for hot-rolled coil, the steelmaker said in a letter to […]

Nucor lifts HR coil to $820/ton
Nucor has increased its consumer spot price (CSP) for hot-rolled (HR) coil for a fourth consecutive week.

Nucor pushes HR spot price to $790/ton
Nucor increased its consumer spot price (CSP) for hot-rolled (HR) coil to $790 per short ton (st) on Monday, Feb. 10 – a $15/st bump vs. last week. The Charlotte, N.C.-based company has raised its weekly CSP by $40/st over the past three weeks after maintaining tags at $750/st since Nov. 12, according to SMU’s […]