Steel Products Prices North America
Weekly Raw Steel Production Recovers Slightly
Written by David Schollaert
August 15, 2022
Raw steel production by US mills edged up marginally last week after declining for two straight weeks. Domestic output was 1,742,000 net tons in the week ending Aug. 13, while capacity utilization was 79%. That marks the fifth week below 80%, according to the latest data from the American Iron and Steel Institute (AISI).
US output was up 1.1% versus the week prior but down 6.9% versus the same period last year when production was 1,872,000 net tons. Mill capacity utilization last week was 0.8 percentage points above the prior week but 5.8 percentage points below the same period one year ago when utilization was 84.8%.
Adjusted year-to-date production through Aug. 13 totaled 56,212,000 net tons, at an average utilization rate of 80.1%. That’s 3.2% below the same period last year when production was 58,088,000 net tons, though the utilization rate was lower then at 80.7%, AISI said.
Output rose in three of five regions last week, driven by a 26,000-net-ton gain week-on-week (WoW) in the South. Increases of 5,000 net tons (Midwest) and 1,000 net tons (West) rounded out the WoW increases.
Production by region for the week ending Aug. 13 was as follows: Northeast, 159,000 tons; Great Lakes, 557,000 tons; Midwest, 202,000 tons; South, 757,000 tons; and West, 67,000 tons—for a total of 1,742,000 net tons, up 19,000 net tons from the prior week.
Note: The raw steel production tonnage provided in this report is estimated. The figures are compiled from weekly production tonnage provided by approximately 50% of the domestic production capacity combined with the most recent monthly production data for the remainder. Therefore, this report should be used primarily to assess production trends. The AISI production report “AIS 7,” published monthly and available by subscription, provides a more detailed summary of steel production based on data supplied by companies representing 75% of US production capacity.
By David Schollaert, David@SteelMarketUpdate.com
David Schollaert
Read more from David SchollaertLatest in Steel Products Prices North America
Plate report: Prices getting closer to pre-Covid norms
The US plate market finds itself in unfamiliar territory, well maybe unfamiliar territory for this side of the post-Covid “normal,” that is.
SMU price ranges: Sheet momentum indicator shifts to neutral in mixed market
SMU’s steel price indices showed mixed signals for a second consecutive week. Our hot rolled, cold rolled, and plate price indices inched lower from last week, as the galvanized index held steady and Galvalume's ticked higher.
Nucor increases CSP, aims for $720/ton on HRC
Nucor has raised its weekly consumer spot price (CSP) by $10 per short for hot-rolled (HR) coil to $720/st.
Nucor inches HR price up, aims for $695/ton
Nucor increased its consumer spot price (CSP) for hot-rolled (HR) coil to $695 per short ton (st), up $5/st from last week.
Nucor maintains $690/ton HR base price
Nucor’s weekly consumer spot price (CSP) for hot-rolled (HR) coil is unchanged from last week at $690/ton.