Steel Markets
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/media/k2/items/src/fe2611b6cbceb6ce973c444c2c7d979b.jpg)
April CPIP Data Shows Continued Growth in Construction Spending
Written by Peter Wright
June 4, 2018
Total construction spending through April has expanded for eight straight months, according to Steel Market Update’s latest analysis of Commerce Department data. The growth of total construction on a rolling three-month basis year over year has increased every month since August last year and reached 6.0 percent in April.
Construction expenditures data is developed by the Department of Commerce and is referred to as CPIP (construction put in place). Since construction is extremely seasonal; the growth or contraction we report in this analysis has had seasonality removed by providing only year-over-year comparisons.
At SMU, we analyze the CPIP data to provide a clear description of activity that accounts for about 45 percent of total U.S. steel consumption. See the end of this report for more detail on how we perform this analysis and structure the data. In particular, note that we present non-seasonally adjusted numbers and we don’t include expenditures for residential improvements. Our rationale is that construction is highly seasonal and our businesses function in a seasonal world, and home improvements don’t consume much steel. For these reasons, our results may not align with other sources.
Total Construction
Total construction expanded by 6.0 percent in the three months through April year over year. Growth has increased steadily from 0.5 percent in August last year. On a rolling 12-months basis year over year, growth in April was 2.8 percent. Since the three-month growth rate is higher than the 12-month rate, we conclude that momentum is positive. April construction expenditures totaled $88.58 billion, which breaks down to $65.88 billion of private work, $20.60 billion of state and locally funded (S&L) work, and $2.1 billion of federally funded work (Table 1). Growth trend columns in all four tables in this report show momentum.
Figure 1 shows total construction expenditures on a rolling 12-month basis as the blue line and the rolling three-month year-over-year growth rate as the brown bars. Total construction is at an all-time high.
Figures 1 through 4 in this analysis have the same format, the result of which is to smooth out variation and eliminate seasonality. We consider four sectors within total construction. These are nonresidential, residential, infrastructure and other. The latter is a catchall and includes industrial, utilities and power. Of these four sectors, only nonresidential buildings had negative momentum in the April result.
The pre-recession peak of total construction on a rolling 12-month basis was $1.028 trillion through November 2006. The low point was $665.1 billion in the 12 months through October 2011. In 12 months through April 2018, construction expenditures totaled $1.062 trillion. (This number excludes residential improvements; see explanation below.)
Private Construction
Table 2 shows the breakdown of private expenditures into residential and nonresidential and subsectors of both. The growth rate of private construction in three months through April was 5.7 percent, up from 1.9 percent in the three months through last November as shown by the brown bars in Figure 2. At the present rate, private construction will reach the pre-recession rate of expenditures by about the end of this year.
Excluding property improvements, our report shows that single-family residential grew by 10.4 percent in three months through April with positive momentum, and multifamily residential contracted by 4.4 percent with negative momentum. Homebuilder sentiment is high, but has been declining since last December. In our view, the 2018 tax legislation and rising interest rates put single-family home construction in jeopardy. The Census Bureau reports on construction starts in its housing analysis. In the starts data, the whole project is entered into the database when ground is broken. Construction put in place is based on spending work as it occurs; the value of a project is spread out from the project’s start to its completion. Single-family starts grew at 6.0 percent in the three months through April, which was lower than the growth rate of CPIP. Multifamily starts grew by 10.7 percent year over year in April.
Within private nonresidential buildings, all sectors except commercial (mainly stores) had positive momentum. The second quarter Federal Reserve Senior Loan Officer Survey indicated there is currently a net decrease in demand for construction and land development loans and that loan terms are tightening. The Fed survey reviews changes in the terms of, and demand for, bank loans to businesses on a quarterly basis based on the responses from 73 domestic banks and 24 U.S. branches and agencies of foreign banks.
State and Local Construction
S&L work expanded by 4.6 percent in the rolling three months through April year over year with positive momentum. However, December through April were the first months with positive growth since May 2016 (Table 3). The improvement was driven by nonresidential buildings. The overall S&L figure includes both nonresidential buildings and infrastructure.
Figure 3 shows that S&L nonresidential buildings expanded by 4.6 percent in three months through April, which was almost unchanged from February and March. Total S&L nonresidential buildings slumped in the period May 2016 through September 2017, therefore our year-over-year comparisons will probably look good for the next few months. Educational buildings are by far the largest subsector of S&L nonresidential at $5.568 billion in April and experienced a 4.5 percent positive growth on a rolling three-months basis with positive momentum. The downturn in S&L expenditures in 2016 and 2017 as shown in Figure 3 means that a full recovery to the pre-recession level of expenditures won’t be achieved until well into the next decade.
Drilling down into the private and S&L sectors as presented in Tables 2 and 3 shows which project types should be targeted for steel sales and which should be avoided. There are also regional differences to be considered, data for which is not available from the Commerce Department.
Infrastructure
Infrastructure expenditures had positive growth in the first eight months of 2016, then declined every month through January 2018. February and March 2018 had positive growth, but April declined to zero. Highways and streets including pavement and bridges account for about two-thirds of total infrastructure expenditures. Highway pavement is the main subcomponent of highways and streets and had a 4.8 percent contraction in three months through April. Bridge work contracted by 4.4 percent, down from a 3.5 percent growth rate in February (Table 4).
Infrastructure expenditures had a recent peak in the rolling 12 months through April 2016 and have since declined to a level lower than the previous peak in April 2009 (Figure 4).
Total Building Construction Including Residential
Figure 5 compares year-to-date expenditures for building construction for 2017 and 2018. Single-family residential is dominant and in the 12 months of 2017 totaled $264.5 billion, up from $242.5 billion in 2016. It seems likely that the 2018 tax bill, by its reduction in the deductibility of mortgage interest and local taxes, will negatively affect single-family home construction.
Figure 6 shows total expenditures and growth of nonresidential building construction. Growth slowed in January through July last year, went negative in August through October, then became increasingly positive in November 2017 through April 2018.
Explanation: Each month, the Commerce Department issues its construction put in place (CPIP) data, usually on the first working day covering activity one month and one day earlier. Construction put in place is based on spending work as it occurs, estimated for a given month from a sample of projects. In effect, the value of a project is spread out from the project’s start to its completion. This is different from the starts data published by the Census Bureau for residential construction, by Dodge Data & Analytics and Reed Construction for nonresidential, and Industrial Information Resources for industrial construction. In the case of starts data, the whole project is entered to the database when ground is broken. The result is that the starts data can be very spiky, which is not the case with CPIP.
The official CPIP press release gives no appreciation of trends on a historical basis and merely compares the current month with the previous one on a seasonally adjusted basis. The background data is provided as both seasonally adjusted and non-adjusted. The detail is hidden in the published tables, which SMU tracks and dissects to provide a long-term perspective. Our intent is to provide a route map for those subscribers who are dependent on this industry to “follow the money.” This is a very broad and complex subject, therefore to make this monthly write-up more comprehensible, we are keeping the information format as consistent as possible. In our opinion, the absolute value of the dollar expenditures presented is of little interest. What we are after is the magnitude of growth or contraction of the various sectors. In the SMU analysis, we consider only the non-seasonally adjusted data. We eliminate seasonal effects by comparing rolling three-month expenditures year over year. CPIP data also includes the category of residential improvements, which we have removed from our analysis because such expenditures are minor consumers of steel.
In the four tables included in this analysis, we present the non-seasonally adjusted expenditures for the most recent data release. Growth rates presented are all year over year and are the rate for the single month’s result, the rolling three months and the rolling 12 months. We ignore the single month year-over-year result in our write-ups because these numbers are preliminary and can contain too much noise. The growth trend columns indicate momentum. If the rolling three-month growth rate is stronger than the rolling 12 months, we define that as positive momentum, and vice versa. In the text, when we refer to growth rate, we are describing the rolling three-month year-over-year rate. In Figures 1 through 4 and 6, the blue lines represent the rolling 12-month expenditures and the brown bars represent the rolling there-month year-over-year growth rates.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/2023/04/peter-wright.png)
Peter Wright
Read more from Peter WrightLatest in Steel Markets
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/coils2.png)
US steel imports slipped in August after rising in July
July represents the second-lowest monthly rate for steel imports so far this year.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/steel_trade.png)
CRU Insight: Decarbonization will reshape global steel trade flow
This CRU Insight explores how decarbonization will play a significant role in redefining steel trade patterns by shifting regional competitiveness and increasing steel demand needs.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/price_question.png)
Steel Summit 2024: Leading analysts forecast coming year for steel
Leading industry analysts on Monday discussed steel prices and how they will be impacted by trade policy, consolidation, mill discipline, November’s elections, and more.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/AISI.png)
AISI: Raw steel output jumps, capability surpasses 80%
Having risen for three weeks in a row, weekly production is now at the highest rate seen since February 2023.
![](https://www.steelmarketupdate.com/wp-content/uploads/sites/2/images/Featured_News_Icons/worldsteel_logo.png)
Monthly steel output falls in China, rises in RoW
Global steel output fell 5% in July according to World Steel Association’s (worldsteel) latest release. Total steel mill production around the world tallied up to 152.8 million metric tons (mt) for the month of July, the second-lowest monthly rate seen this year.