Steel Products
Construction Employment Increases In October
Written by Sandy Williams
November 17, 2017
Construction jobs were added in 41 states between October 2016 and October 2017, while 26 states added construction jobs between September and October, according to an analysis by the Associated General Contractors of America of Labor Department data. The October jobs data continues a pattern of widespread but uneven growth in industry employment, said AGC.
Construction job growth in Florida and Georgia are a rebound from projects and workers that were displaced by Hurricane Irma, said Chief Economist Ken Simonson. “Similarly, the increase in Texas indicates ongoing recovery from Hurricane Harvey, which hit that state in late August. Aside from those three states, there was no net increase in construction employment from September to October, which could indicate how tight the job market is, rather than a drop-off in demand for workers. “
“Although construction employment has risen over the past year, many contractors report difficulty finding workers with the right skills,” said Simonson. “Last month, construction employment increased in only half the states, a total that would probably have been higher if workers were available.”
California added the most construction jobs (44,400 jobs, 5.7 percent) during the past year. Other states adding a high number of new construction jobs for the past 12 months include Florida (35,600 jobs, 7.4 percent); Texas (17,200 jobs, 2.4 percent); Oregon (10,700 jobs, 11.5 percent); Nevada (10,600 jobs, 13.6 percent) and Washington (10,500 jobs, 5.5 percent). Nevada added the highest percentage of new construction jobs during the past year, followed by Rhode Island (12.0 percent, 2,200 jobs); Oregon; and New Hampshire (9.7 percent, 2,500 jobs). Industry employment reached an all-time high in three states: Massachusetts, Oklahoma and Texas.
{loadposition reserved_message}
Nine states and the District of Columbia shed construction jobs between October 2016 and October 2017. Missouri lost the highest number of construction jobs (-5,800 jobs, -4.8 percent); followed by Iowa (-5,300 jobs, -6.6 percent); Illinois (-3,500 jobs, -1.6 percent) and North Carolina (-3,300 jobs, -1.6 percent). Iowa lost the highest percentage for the year, followed by Missouri; North Dakota (-3.9 percent, -1,300 jobs); Nebraska (-2.1 percent, -1,100 jobs); North Carolina and Illinois.
Among the 26 states that added construction jobs between September and October, Florida added the most (23,800 jobs, 4.8 percent), followed by New York (5,700 jobs, 1.5 percent); Georgia (5,500 jobs, 3.2 percent) and Texas (4,500 jobs, 0.6 percent). Florida also added the highest percentage of construction jobs, followed by Connecticut (3.9 percent, 2,200 jobs); Montana (3.4 percent, 900 jobs); West Virginia (3.3 percent, 1,000 jobs); and Georgia.
Twenty-three states and D.C. lost construction jobs between September and October, while construction employment was unchanged in Kansas. Louisiana lost the most construction jobs for the month (-3,300 jobs, -2.2 percent), followed by Indiana (-2,400 jobs, -1.8 percent); Minnesota (-2,300 jobs, -1.9 percent) and Nebraska (-1,800 jobs, -3.4 percent). Nebraska lost the highest percentage of construction jobs, followed by Alaska (-3.1 percent, -500 jobs) and North Dakota (-2.2 percent, -700 jobs).
Sandy Williams
Read more from Sandy WilliamsLatest in Steel Products
Price gap between domestic, offshore CRC narrows
The price spread between US-produced cold-rolled (CR) coil and offshore products tightened in the week ended Jan. 17. Domestic CR coil tags were lower week on week (w/w), while offshore products ticked higher. The result? The US premium over imports shrank. In our market check on Tuesday, Jan. 14, US CR coil prices averaged $895 […]
US HR price premium over imports narrows slightly
Hot-rolled (HR) coil prices ticked down in the US last week, while tags abroad varied. The result: US hot band margin over imports on a landed basis has narrowed to a slight extent. SMU’s average domestic HR price last week was $685 per short ton (st), down $5/st from the week before. US hot band […]
SMU Community Chat: Jan. 22 with Alan Kestenbaum, founder of Bedrock Industries
Alan Kestenbaum, the founder of Bedrock Industries and the former CEO of Stelco, will be the featured speaker on the next SMU Community Chat. The webinar will be on Wednesday, Jan. 22, at 11 am ET. It’s free to attend. You can register here. We’ll look at Stelco’s recent sale to Cleveland-Cliffs and what made […]
December service center shipments and inventories report
Flat rolled = 77.1 shipping days of supply Plate = 58.1 shipping days of supply Flat rolled Flat-rolled steel supply at US service centers ballooned in December with higher inventories as well as seasonally lower shipments. At the end of December, service centers carried 77.1 shipping days of flat-rolled steel supply on an adjusted basis, […]
SMU Community Chat replay now available
The latest SMU Community Chat webinar reply is now available on our website to all members. After logging in at steelmarketupdate.com, visit the community tab and look under the “previous webinars” section of the dropdown menu. All past Community Chat webinars are also available under that selection. If you need help accessing the webinar replay, or if your company […]